foratvise
Get Started
organizational external

Packing line starvation/blocking due to upstream or downstream imbalance

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 56 % of the line's lost time. Reported by 2 of the 112 studies that could observe it (limited evidence).

What happens

The packing line stands idle not because of an internal fault but because it either receives insufficient product from the upstream process (starvation) or cannot discharge finished goods because there is no downstream demand, order, or storage capacity (blocking). This reflects a mismatch between the capacity or rate of the packing line and the capacity, rate, or business pull of the adjacent processes or market, rather than a mechanical or control failure of the packer itself.

What is done about it

Size and manage intermediate buffers or accumulation conveyors to decouple the packing line from rate variability of neighboring processes, balance line speeds across the production chain, and align production scheduling, demand forecasting, and order release with packing line capacity to minimize starvation and blocking events.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.8% [0.2–2.0%]
Expected share of lost time
0.5% [0.1–1.1%]
Share of lost time when present
56% [44–66%]
Studies / units
112 / 155
Evidence grade
C

Grade C: 2 to 4 studies, or an interval wider than 0.35.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.9% [0.1–3.1%]14 studies
  • Soft drinks, bottled water and juices
    0.8% [0.1–2.3%]33 studies
  • Brewing, wine and spirits
    0.9% [0.1–2.8%]14 studies
  • Bakery and pasta
    0.9% [0.1–3.2%]6 studies
  • Meat, poultry and seafood
    1.0% [0.1–3.5%]6 studies
  • Fruit and vegetable processing
    1.0% [0.1–3.5%]4 studies
  • Grain and oilseed milling
    1.4% [0.2–5.1%]4 studies
  • Sugar and confectionery
    1.0% [0.1–3.4%]4 studies
  • Snacks, coffee, tea and other foods
    0.9% [0.1–3.3%]8 studies
  • Animal feed and pet food
    0.9% [0.1–3.2%]5 studies
  • Food manufacturing (unspecified or mixed)
    1.3% [0.2–4.4%]14 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

The packing line stands idle not because of an internal fault but because it either receives insufficient product from the upstream process (starvation) or cannot discharge finished goods because there is no downstream demand, order, or storage capacity (blocking). This reflects a mismatch between the capacity or rate of the packing line and the capacity, rate, or business pull of the adjacent processes or market, rather than a mechanical or control failure of the packer itself.

How it looks in SCADA data

Engineering guidance

SCADA/MES shows the packing line in a waiting or idle state with no active fault or alarm, while upstream equipment either runs below the packer's demand rate or is stopped, and/or downstream buffers, accumulation conveyors, or storage silos read full; stop-reason logs are tagged as starved or blocked rather than as mechanical downtime, and the pattern often coincides with order or shift-schedule boundaries.

Countermeasure

Engineering guidance

Size and manage intermediate buffers or accumulation conveyors to decouple the packing line from rate variability of neighboring processes, balance line speeds across the production chain, and align production scheduling, demand forecasting, and order release with packing line capacity to minimize starvation and blocking events.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 1,680 min · as reported: “Waiting for WIP”
    Show verbatim quote
    Menunggu WIP 1680 86%
  2. Share of lost time: 2.00 % · as reported: “lack of product input to the packing line (upstream losses)”
    Show verbatim quote
    Major Availability losses were categorized as: non-scheduled maintenance (29,010 min. - 58% of Availability losses); packaging failure (11,079 min. - 22%); lack of demand that are downstream losses (8,260 min. - 13%) and; lack of product input to the packing line (952 min. – 2%).
  3. Lost time: 952 min · as reported: “lack of product input to the packing line (upstream losses)”
    Show verbatim quote
    Major Availability losses were categorized as: non-scheduled maintenance (29,010 min. - 58% of Availability losses); packaging failure (11,079 min. - 22%); lack of demand that are downstream losses (8,260 min. - 13%) and; lack of product input to the packing line (952 min. – 2%).
  4. Share of lost time: 13.0 % · as reported: “lack of demand (downstream losses)”
    Show verbatim quote
    Major Availability losses were categorized as: non-scheduled maintenance (29,010 min. - 58% of Availability losses); packaging failure (11,079 min. - 22%); lack of demand that are downstream losses (8,260 min. - 13%) and; lack of product input to the packing line (952 min. – 2%).
  5. Lost time: 8,260 min · as reported: “lack of demand (downstream losses)”
    Show verbatim quote
    Major Availability losses were categorized as: non-scheduled maintenance (29,010 min. - 58% of Availability losses); packaging failure (11,079 min. - 22%); lack of demand that are downstream losses (8,260 min. - 13%) and; lack of product input to the packing line (952 min. – 2%).