Vent tube bent or loose
In short
It appears in about 1 of every 100 lines studied.
When it appears, it takes on average about 57 % of the line's lost time. Reported by 1 of the 120 studies that could observe it (sparse evidence).
What happens
The vent tube on a filling valve, which controls liquid level by allowing displaced air or product overflow to escape, becomes bent out of its correct position or works loose from its mounting due to mechanical shock, vibration, or wear of the clamping fixture. This misalignment or play prevents the tube from seating correctly in the container neck, disrupting the fill cycle and the level or vacuum reference it provides.
What is done about it
Inspect and straighten or replace bent vent tubes, and tighten or redesign the mounting clamp to prevent loosening under vibration; include vent tube alignment and tightness in routine preventive maintenance checks on filling valves.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.6% [0.1–1.5%]
- Expected share of lost time
- 0.3% [0.1–0.9%]
- Share of lost time when present
- 57% [46–67%]
- Studies / units
- 120 / 162
- Evidence grade
- D
Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.
2Probability by segment
- Dairy products0.6% [0.1–2.3%]18 studies
- Soft drinks, bottled water and juices0.7% [0.1–2.3%]44 studies
- Brewing, wine and spirits0.6% [0.1–2.0%]16 studies
- Bakery and pasta0.7% [0.1–2.5%]0 studies
- Meat, poultry and seafood0.6% [0.1–2.4%]6 studies
- Fruit and vegetable processing0.7% [0.1–2.4%]4 studies
- Grain and oilseed milling0.6% [0.1–2.3%]6 studies
- Sugar and confectionery0.7% [0.1–2.6%]3 studies
- Snacks, coffee, tea and other foods0.6% [0.1–2.5%]6 studies
- Animal feed and pet food0.6% [0.1–2.3%]4 studies
- Food manufacturing (unspecified or mixed)0.6% [0.1–2.4%]13 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceThe vent tube on a filling valve, which controls liquid level by allowing displaced air or product overflow to escape, becomes bent out of its correct position or works loose from its mounting due to mechanical shock, vibration, or wear of the clamping fixture. This misalignment or play prevents the tube from seating correctly in the container neck, disrupting the fill cycle and the level or vacuum reference it provides.
How it looks in SCADA data
Engineering guidanceRepeated short stops or fault alarms on individual filling valves/heads, often correlated with a specific valve position across cycles, with maintenance log entries for tube straightening or replacement. Fill-level or pressure sensor readings on the affected head show erratic or out-of-tolerance values just before the stoppage.
Countermeasure
Engineering guidanceInspect and straighten or replace bent vent tubes, and tighten or redesign the mounting clamp to prevent loosening under vibration; include vent tube alignment and tightness in routine preventive maintenance checks on filling valves.
4Sources
- Efficiency Improvement of Glass Bottle Filler Machine Using Autonomous Maintenance-A Case Study (2025)Open sourceLost time: 35.0 min · as reported: “Vent tube bent correction/change”
Show verbatim quote
Vent tube bent correction/change 0 2 0 0 10 23 35 2.39
- Efficiency Improvement of Glass Bottle Filler Machine Using Autonomous Maintenance-A Case Study (2025)Open sourceShare of lost time: 2.39 % · as reported: “Vent tube bent correction/change”
Show verbatim quote
Vent tube bent correction/change 0 2 0 0 10 23 35 2.39
- Efficiency Improvement of Glass Bottle Filler Machine Using Autonomous Maintenance-A Case Study (2025)Open sourceLost time: 2.00 min · as reported: “Vent tube bent correction/change”
Show verbatim quote
19 | Vent tube bent correction/change | 0 | 2 | 0 | 0 | 10 | 23 | 35 | 2.39
- A SEMINAR PAPER ON “OVERALL EQUIPMENT EFFECTIVENESS: A CASE STUDY AT A BOTTLING PLANT” (2023)Open sourceNumber of events: 16.0 events · as reported: “Looses vent tube”
Show verbatim quote
2 Looses vent tube 16 37 61%

