foratvise
Get Started
organizational external

Waiting for supervisor or maintenance instructions

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 55 % of the line's lost time. Reported by 1 of the 127 studies that could observe it (sparse evidence).

What happens

The line stands idle because operators lack authorization or technical direction to proceed, needing to wait for a supervisor, planner or maintenance technician to issue instructions or work orders before action can be taken. This reflects an organizational communication or decision-making bottleneck rather than a technical equipment fault.

What is done about it

Establish clear escalation protocols, decentralized decision authority and standing work instructions so operators can act without waiting for case-by-case approval, supported by radio or digital messaging systems for rapid dispatch of maintenance orders. Visual management boards and predefined response trees for common scenarios reduce dependency on real-time supervisor availability.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.5% [0.1–1.5%]
Expected share of lost time
0.3% [0.1–0.9%]
Share of lost time when present
55% [44–65%]
Studies / units
127 / 161
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.6% [0.1–2.4%]13 studies
  • Soft drinks, bottled water and juices
    0.6% [0.1–2.0%]26 studies
  • Brewing, wine and spirits
    0.6% [0.1–2.4%]11 studies
  • Bakery and pasta
    0.6% [0.1–2.1%]24 studies
  • Meat, poultry and seafood
    0.9% [0.1–3.5%]9 studies
  • Fruit and vegetable processing
    0.6% [0.1–2.4%]7 studies
  • Grain and oilseed milling
    0.7% [0.1–2.5%]6 studies
  • Sugar and confectionery
    0.6% [0.1–2.3%]9 studies
  • Snacks, coffee, tea and other foods
    0.6% [0.1–2.5%]5 studies
  • Animal feed and pet food
    0.6% [0.1–2.3%]7 studies
  • Food manufacturing (unspecified or mixed)
    0.6% [0.1–2.3%]10 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

The line stands idle because operators lack authorization or technical direction to proceed, needing to wait for a supervisor, planner or maintenance technician to issue instructions or work orders before action can be taken. This reflects an organizational communication or decision-making bottleneck rather than a technical equipment fault.

How it looks in SCADA data

Engineering guidance

SCADA/MES shows the line or station in an idle or standby state with no active alarm and no material movement, often logged under a generic downtime reason code awaiting manual operator classification. Duration tends to be irregular and not correlated with any sensor fault, and the stop typically ends abruptly once a manual command or mode change is entered by an operator.

Countermeasure

Engineering guidance

Establish clear escalation protocols, decentralized decision authority and standing work instructions so operators can act without waiting for case-by-case approval, supported by radio or digital messaging systems for rapid dispatch of maintenance orders. Visual management boards and predefined response trees for common scenarios reduce dependency on real-time supervisor availability.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 5,153 min · as reported: “Waiting for maintenance instruction and orders”
    Show verbatim quote
    Waiting for maintenance instruction and orders 5153 4.92 98.22
  2. Share of lost time: 4.92 % · as reported: “Waiting for maintenance instruction and orders”
    Show verbatim quote
    Waiting for maintenance instruction and orders 5153 4.92 98.22
  3. Lost time: 7.00 min/day · as reported: “clarification of the shift task”
    Show verbatim quote
    The development and implementation of the printed form of the shift task have helped to eliminate the daily time spent (7 minutes) for its clarification and have also eliminated the loss of information by the work performers
  4. Lost time: 10.0 min · as reported: “waiting for instructions from superiors”
    Show verbatim quote
    10 minutes of waiting for instructions from superiors to start the day's production.
  5. Lost time: 5.00 min · as reported: “waiting for instructions from superiors”
    Show verbatim quote
    Waiting times reduced from 20 min to 10 min and from 10 min to 5 min which represents 50% completion