foratvise
Get Started
Included study

Maintenance Performance Evaluation and Downtime Analysis of Manufacturing Equipment in a Food Manufacturing Company

Open source

1Bibliographic record

Authors
Nkemakonam Chidiebube Igbokwe, Harold Chukwuemeka Godwin
Year
2021
Venue
Journal of Engineering Research and Reports
Country
Nigeria
Segment
Food manufacturing (unspecified or mixed)
Process family
Whole plant or unspecified
Study type
Single case study
Extraction scope
Full text
Size
1 plants · — lines · — machines
Observation period
1,095 days
Data collection
maintenance_records
Intervention
Show the setting as described by the study
Necessary data was collected from three years historical maintenance records (production data, records of equipment faults and failures, and factory maintenance compliance sheet) and through twelve months direct observation of manufacturing machines and maintenance activities in a food and beverage manufacturing company based in Anambra state, Nigeria.

2Risk of bias

Scored with the rubric of the protocol: 2 low concern, 1 some concerns, 0 high concern.
Total score 11Moderate risk
ItemScore
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?The setting cannot be classified beyond "a food company".0 / 2
Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events).2 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown.1 / 2
Does the loss breakdown account for the total loss it claims to explain?The reported causes or categories sum to at least 90% of the stated total, or an explicit "other" class closes the balance.2 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Extracted data

Each datum with its classification and the verbatim quote that states it.
Reported causeLoss categoryMetricValueExtraction
—
Show verbatim quote (Section 3 Results and Discussion)
the average (Mean value of three years observation) overall equipment effectiveness is 55.30% which is a low value when compared with OEE world standards
noneOEE55.3 %Both extractors agreed
Scheduled Maintenance
Show verbatim quote (Table 4. Downtime factors)
Scheduled Maintenance 42723 40.82 40.82
Planned downtime (scheduled maintenance, breaks, no demand)Lost time42,723 minSingle extractor
Scheduled Maintenance
Show verbatim quote (Table 4. Downtime factors)
Scheduled Maintenance 42723 40.82 40.82
Planned downtime (scheduled maintenance, breaks, no demand)Share of lost time40.8 %Single extractor
Equipment Failures/Breakdown
Show verbatim quote (Table 4. Downtime factors)
Equipment Failures/Breakdown 25398 24.26 65.08
Equipment failure (breakdowns)Lost time25,398 minSingle extractor
Equipment Failures/Breakdown
Show verbatim quote (Table 4. Downtime factors)
Equipment Failures/Breakdown 25398 24.26 65.08
Equipment failure (breakdowns)Share of lost time24.3 %Single extractor
Waiting for materials to arrive
Show verbatim quote (Table 4. Downtime factors)
Waiting for materials to arrive 19856 18.93 84.01
Organizational or external stops (material or personnel shortage, utilities outage)Lost time19,856 minSingle extractor
Waiting for materials to arrive
Show verbatim quote (Table 4. Downtime factors)
Waiting for materials to arrive 19856 18.93 84.01
Organizational or external stops (material or personnel shortage, utilities outage)Share of lost time18.9 %Single extractor
Maintenance job meetings
Show verbatim quote (Table 4. Downtime factors)
Maintenance job meetings 9723 9.29 93.3
Organizational or external stops (material or personnel shortage, utilities outage)Lost time9,723 minSingle extractor
Maintenance job meetings
Show verbatim quote (Table 4. Downtime factors)
Maintenance job meetings 9723 9.29 93.3
Organizational or external stops (material or personnel shortage, utilities outage)Share of lost time9.29 %Single extractor
Waiting for maintenance instruction and orders
Show verbatim quote (Table 4. Downtime factors)
Waiting for maintenance instruction and orders 5153 4.92 98.22
Organizational or external stops (material or personnel shortage, utilities outage)Lost time5,153 minSingle extractor
Waiting for maintenance instruction and orders
Show verbatim quote (Table 4. Downtime factors)
Waiting for maintenance instruction and orders 5153 4.92 98.22
Organizational or external stops (material or personnel shortage, utilities outage)Share of lost time4.92 %Single extractor
Miscellaneous activities
Show verbatim quote (Table 4. Downtime factors)
Miscellaneous activities 1797 1.71 100.00
Not classifiable from the reportLost time1,797 minSingle extractor
Miscellaneous activities
Show verbatim quote (Table 4. Downtime factors)
Miscellaneous activities 1797 1.71 100.00
Not classifiable from the reportShare of lost time1.71 %Single extractor

Observation units

  • Food manufacturing company (whole plant) · Whole line or unspecified equipment · Baseline