foratvise
Get Started
Process defects (scrap and rework)

Wrap/pack quality defect requiring rework

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 48 % of the line's lost time. Reported by 1 of the 112 studies that could observe it (sparse evidence).

What happens

During stable packaging operation the wrapping or sealing process produces units that fail first-pass quality criteria, such as incomplete seals, torn or wrinkled film, misaligned wraps, or out-of-spec package appearance. These non-conforming units are diverted for manual rework, downgrading, or scrap rather than passing directly to the next process step.

What is done about it

Verify and adjust wrapping machine settings such as film tension, sealing temperature and pressure, and alignment guides, and inspect incoming film or packaging material for quality issues. Implement routine preventive checks on sealing jaws and wrap heads, and use statistical monitoring of reject rates to detect drift before it escalates.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.6% [0.1–1.5%]
Expected share of lost time
0.3% [0.1–0.8%]
Share of lost time when present
48% [36–60%]
Studies / units
112 / 155
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.6% [0.1–2.4%]14 studies
  • Soft drinks, bottled water and juices
    0.5% [0.1–1.8%]33 studies
  • Brewing, wine and spirits
    0.6% [0.1–2.0%]14 studies
  • Bakery and pasta
    1.0% [0.1–3.8%]6 studies
  • Meat, poultry and seafood
    0.7% [0.1–2.5%]6 studies
  • Fruit and vegetable processing
    0.7% [0.1–2.5%]4 studies
  • Grain and oilseed milling
    0.7% [0.1–2.6%]4 studies
  • Sugar and confectionery
    0.7% [0.1–2.5%]4 studies
  • Snacks, coffee, tea and other foods
    0.7% [0.1–2.4%]8 studies
  • Animal feed and pet food
    0.7% [0.1–2.5%]5 studies
  • Food manufacturing (unspecified or mixed)
    0.6% [0.1–2.3%]14 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

During stable packaging operation the wrapping or sealing process produces units that fail first-pass quality criteria, such as incomplete seals, torn or wrinkled film, misaligned wraps, or out-of-spec package appearance. These non-conforming units are diverted for manual rework, downgrading, or scrap rather than passing directly to the next process step.

How it looks in SCADA data

Engineering guidance

MES/quality modules show increased reject or rework counters at the wrapping station without corresponding machine downtime, since the line keeps running while defective units are pulled off the flow. Quality or vision inspection stations downstream register elevated fail rates, and rework buffer or scrap bin counts trend upward during specific shifts or material lots.

Countermeasure

Engineering guidance

Verify and adjust wrapping machine settings such as film tension, sealing temperature and pressure, and alignment guides, and inspect incoming film or packaging material for quality issues. Implement routine preventive checks on sealing jaws and wrap heads, and use statistical monitoring of reject rates to detect drift before it escalates.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Share of lost time: 63.5 % · as reported: “Quality Defect/Rework”
    Show verbatim quote
    Quality Defect/Rework 247,72% 63,54% 63,5%
  2. Defect rate: 10.2 % · as reported: “wrapper error waste”
    Show verbatim quote
    Prior to the start of the project, an average of 148,900 pounds of cheese salvage was created weekly as a result of wrapper error waste. This translated into a 10.24% salvage rate.