Labeling machine changeover and setup
In short
It appears in about 2 of every 100 lines studied.
When it appears, it takes on average about 56 % of the line's lost time. Reported by 8 of the 85 studies that could observe it (good evidence).
What happens
Switching product, bottle shape or label format on the labeling machine requires mechanical adjustments such as changing label reels, resetting guide rails and star wheels, and recalibrating sensors and print/apply heads before stable operation is reached. Part of this work is done as internal setup with the line fully stopped, while other tasks could be performed externally while the previous run is still producing, so poor preparation extends the stoppage. The resulting dead time between the last good unit of the previous run and the first good unit of the new run is recorded as changeover loss.
What is done about it
Apply SMED analysis to separate internal from external setup tasks, pre-staging label reels, tooling and format parts so they are ready before the line stops, and standardizing guide and sensor settings with quick-adjust mechanisms or format recipes stored in the control system. Training operators on a documented changeover sequence and using quick-release fixtures further reduces the internal setup time.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 2.3% [0.8–5.1%]
- Expected share of lost time
- 1.3% [0.4–2.9%]
- Share of lost time when present
- 56% [45–66%]
- Studies / units
- 85 / 113
- Evidence grade
- B
Grade B: 5 to 9 studies, or an interval width between 0.20 and 0.35.
2Probability by segment
- Dairy products2.4% [0.4–6.8%]11 studies
- Soft drinks, bottled water and juices3.5% [1.0–8.3%]29 studies
- Brewing, wine and spirits7.1% [1.8–17.2%]13 studies
- Bakery and pasta2.8% [0.4–9.0%]1 study
- Meat, poultry and seafood2.6% [0.4–7.7%]4 studies
- Fruit and vegetable processing2.6% [0.4–8.3%]4 studies
- Grain and oilseed milling2.6% [0.4–8.0%]3 studies
- Sugar and confectionery2.7% [0.4–8.4%]3 studies
- Snacks, coffee, tea and other foods2.5% [0.4–8.0%]4 studies
- Animal feed and pet food2.6% [0.4–7.9%]4 studies
- Food manufacturing (unspecified or mixed)2.4% [0.4–7.1%]9 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceSwitching product, bottle shape or label format on the labeling machine requires mechanical adjustments such as changing label reels, resetting guide rails and star wheels, and recalibrating sensors and print/apply heads before stable operation is reached. Part of this work is done as internal setup with the line fully stopped, while other tasks could be performed externally while the previous run is still producing, so poor preparation extends the stoppage. The resulting dead time between the last good unit of the previous run and the first good unit of the new run is recorded as changeover loss.
How it looks in SCADA data
Engineering guidanceThe labeler machine state switches to setup, changeover or stopped mode for an extended duration between the end-of-batch event of one SKU and the start-of-production event of the next, often correlated with operator login or changeover job logs in the MES. Upstream and downstream conveyor accumulation and starvation states appear around the same window, and minor idle events may cluster immediately after restart while the machine stabilizes.
Countermeasure
Engineering guidanceApply SMED analysis to separate internal from external setup tasks, pre-staging label reels, tooling and format parts so they are ready before the line stops, and standardizing guide and sensor settings with quick-adjust mechanisms or format recipes stored in the control system. Training operators on a documented changeover sequence and using quick-release fixtures further reduces the internal setup time.
4Sources
- Optimizing beverage manufacturing: integrating lean manufacturing and machine learning to enhance efficiency and reduce waste (2025)Open sourceNumber of events: 8.00 Boxes x 12 · as reported: “Mislabeling”
Show verbatim quote
Mislabeling Average 15 8
- Optimizing beverage manufacturing: integrating lean manufacturing and machine learning to enhance efficiency and reduce waste (2025)Open sourceNumber of events: 15.0 Boxes x 12 · as reported: “Mislabeling”
Show verbatim quote
Mislabeling Average 15 8
- Optimizing beverage manufacturing: integrating lean manufacturing and machine learning to enhance efficiency and reduce waste (2025)Open sourceMean event duration: 42.0 min · as reported: “Line change time”
Show verbatim quote
Line change time Average 42 16
- Optimizing beverage manufacturing: integrating lean manufacturing and machine learning to enhance efficiency and reduce waste (2025)Open sourceMean event duration: 16.0 min · as reported: “Line change time”
Show verbatim quote
Line change time Average 42 16
- USO DA TROCA RÁPIDA DE FERRAMENTAS – TRF – COMO ESTRATÉGIA DE AUMENTO DE PRODUTIVIDADE EM UMA ROTULADORA DE GARRAFAS PLÁSTICAS (2012)Open sourceLost time: 2.00 min · as reported: “Adjustment of tulip height”
Show verbatim quote
Regulagem da altura das tulipas 2
- USO DA TROCA RÁPIDA DE FERRAMENTAS – TRF – COMO ESTRATÉGIA DE AUMENTO DE PRODUTIVIDADE EM UMA ROTULADORA DE GARRAFAS PLÁSTICAS (2012)Open sourceLost time: 3.00 min · as reported: “Adjustment of gluing units”
Show verbatim quote
Regulagem dos grupos coladores 3
- USO DA TROCA RÁPIDA DE FERRAMENTAS – TRF – COMO ESTRATÉGIA DE AUMENTO DE PRODUTIVIDADE EM UMA ROTULADORA DE GARRAFAS PLÁSTICAS (2012)Open sourceLost time: 1.00 min · as reported: “Adjustment of label sensors”
Show verbatim quote
Regulagem dos sensores dos rótulos 1
- USO DA TROCA RÁPIDA DE FERRAMENTAS – TRF – COMO ESTRATÉGIA DE AUMENTO DE PRODUTIVIDADE EM UMA ROTULADORA DE GARRAFAS PLÁSTICAS (2012)Open sourceLost time: 1.00 min · as reported: “Adjustment of tulip height”
Show verbatim quote
Regulagem da altura das tulipas 1
- USO DA TROCA RÁPIDA DE FERRAMENTAS – TRF – COMO ESTRATÉGIA DE AUMENTO DE PRODUTIVIDADE EM UMA ROTULADORA DE GARRAFAS PLÁSTICAS (2012)Open sourceLost time: 3.00 min · as reported: “Adjustment of gluing units”
Show verbatim quote
Regulagem dos grupos coladores 3
- USO DA TROCA RÁPIDA DE FERRAMENTAS – TRF – COMO ESTRATÉGIA DE AUMENTO DE PRODUTIVIDADE EM UMA ROTULADORA DE GARRAFAS PLÁSTICAS (2012)Open sourceLost time: 1.00 min · as reported: “Adjustment of label sensors”
Show verbatim quote
Regulagem dos sensores dos rótulos 1
- Redução de tempos de setup: aplicação de troca rápida de ferramentas em indústria de bebidas (2015)Open sourceLost time: 31.1 min:s · as reported: “external setup”
Show verbatim quote
Verificação da rotulagem 00:10 TOTAL 16:34 31:06
- Study on Preventive Maintenance Strategies of Filling Equipment Based on Reliability-Cantered Maintenance (2021)Open sourceLost time: 450 min · as reported: “LM”
Show verbatim quote
Total 2540 485 500 560 450 265 225 240 220 5485 224940 2.44%
- Study on Preventive Maintenance Strategies of Filling Equipment Based on Reliability-Cantered Maintenance (2021)Open sourceNumber of events: 17.0 events · as reported: “LM”
Show verbatim quote
Total 61 21 24 22 17 7 11 10 8 181
- Mean event duration: 148 min · as reported: “Setup time”
Show verbatim quote
Blowing machine Filling machine Labelling machine (bottleneck resource) Packaging machine 85 minutes 69 minutes 148 minutes 97 minutes 57 minutes 73 minutes 0 minutes 51 minutes
- Mean event duration: 0 min · as reported: “Idle time”
Show verbatim quote
Blowing machine Filling machine Labelling machine (bottleneck resource) Packaging machine 85 minutes 69 minutes 148 minutes 97 minutes 57 minutes 73 minutes 0 minutes 51 minutes
- Mean event duration: 148 min · as reported: “equipment setup”
Show verbatim quote
In short, our results showed that before the method made its mark, the equipment setup averaged 148 minutes, and after the implementation, the setup time decreased to two digits, approximately 19 minutes (Fig. 4).
- Mean event duration: 19.0 min · as reported: “equipment setup”
Show verbatim quote
In short, our results showed that before the method made its mark, the equipment setup averaged 148 minutes, and after the implementation, the setup time decreased to two digits, approximately 19 minutes (Fig. 4).
- Optimizing Beverage Manufacturing: Integrating Lean Manufacturing and Machine Learning to Enhance Efficiency and Reduce Waste (2024)Open sourceDefect rate: 25.0 % · as reported: “incorrectly labeled bottles”
Show verbatim quote
The main issues concerning the product process include 25% of incorrectly labeled bottles, 18% of improperly sealed bottles, and 12% of reprocessing in the current alcoholic beverage production process.
- Enhancing Productivity through Quick Changeovers: A SMED-Based Methodology in Manufacturing Industry (2026)Open sourceLost time: 900 s · as reported: “Bottle labeling (per bag)”
Show verbatim quote
3 Bottle labeling (per bag) 900 - 900
- Enhancing Productivity through Quick Changeovers: A SMED-Based Methodology in Manufacturing Industry (2026)Open sourceLost time: 600 s · as reported: “Bottle labeling (per bag)”
Show verbatim quote
2 Bottle labeling (per bag) 600 - 600

