Included study
การเพิ่มผลผลิตด้วยวิธีการปรับปรุงประสิทธิผลโดยรวมของเครื่องจักร : กรณีศึกษา โรงงานผลิตอาหารสัตว์
1Bibliographic record
- Authors
- วีรชัย มัฎฐารักษ์, วิมล จันนินวงศ์
- Year
- 2010
- Venue
- The Journal Of Industrial Technology
- DOI
- —
- Country
- Thailand
- Segment
- Animal feed and pet food
- Process family
- Forming, baking and cooking
- Study type
- Before/after intervention
- Extraction scope
- Full text
- Size
- 1 plants · 2 lines · 3 machines
- Observation period
- 90 days
- Data collection
- manual_logs
- Intervention
Show the setting as described by the study
การศึกษาครั้งนี้มีวัตถุประสงคเพื่อตองการเพิ่มผลผลิตดวยวิธีการ OEE หรือการปรับปรุงคาประสิทธิผลโดยรวมของเครื่องจักรอัดเม็ดในโรงงานผลิตอาหารสัตวน้ํา
2Risk of bias
Scored with the rubric of the protocol: 2 low concern, 1 some concerns, 0 high concern.
Total score 9Moderate risk
| Item | Score |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described. | 2 / 2 |
| Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given. | 1 / 2 |
| How were loss data collected?Manual logs or maintenance records with unknown completeness. | 1 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown. | 1 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed. | 1 / 2 |
| Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method. | 1 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Extracted data
Each datum with its classification and the verbatim quote that states it.
| Reported cause | Loss category | Metric | Value | Extraction |
|---|---|---|---|---|
—MP30Show verbatim quote (Table 6)MP 30 75.42 93.72 18.31% | none | OEE | 75.4 % | Both extractors agreed |
—C07Show verbatim quote (Table 6)C07 73.88 85.97 12.09% | none | OEE | 73.9 % | Both extractors agreed |
Waiting Time for raw material (รอวัตถุดิบ)C06Show verbatim quote (Table 4)รอวัตถุดิบ(Waiting Time) 10.08 | Organizational or external stops (material or personnel shortage, utilities outage) | Lost time | 10.1 h | Both extractors agreed |
Machine Adjustment (ปรับตั้งเครื่องจักร)C06Show verbatim quote (Table 4)ปรับตั้งเครื่องจักร 15.83 | Setup and adjustments | Lost time | 15.8 h | Both extractors agreed |
Die Change (เปลี่ยน DIE)C06Show verbatim quote (Table 4)เปลี่ยน DIE 12.17 | Setup and adjustments | Lost time | 12.2 h | Both extractors agreed |
Break Down (เสียรอซอม)C06Show verbatim quote (Table 4)เสียรอซอม(Break Down) 5.33 | Equipment failure (breakdowns) | Lost time | 5.33 h | Both extractors agreed |
—C06Show verbatim quote (Table 6)C06 74.59 83.22 8.63% | none | OEE | 74.6 % | Both extractors agreed |
Clear line / recipe change (Clear line เปลี่ยนสูตร)C06Show verbatim quote (Table 4)Clear line เปลี่ยนสูตร 25.4 | Setup and adjustments | Lost time | 25.4 h | Both extractors agreed |
Production stop (หยุดผลิต)C06Show verbatim quote (Table 3)หยุดผลิต 8 | Planned downtime (scheduled maintenance, breaks, no demand) | Lost time | 8.00 h | Single extractor |
Cleaning (ทําความสะอาด)C06Show verbatim quote (Table 3)ทําความสะอาด 0 | Planned downtime (scheduled maintenance, breaks, no demand) | Lost time | 0 h | Single extractor |
Short pellet size (ขนาดเม็ดสั้น)C06Show verbatim quote (Table 5)ขนาดเม็ดสั้น 0.60 | Process defects (scrap and rework) | Defect rate | 0.600 ตัน | Single extractor |
Two colors (สองสี)C06Show verbatim quote (Table 5)สองสี 1.20 | Process defects (scrap and rework) | Defect rate | 1.20 ตัน | Single extractor |
Wet lump (กอนเปยกปน)C06Show verbatim quote (Table 5)กอนเปยกปน 0.00 | Process defects (scrap and rework) | Defect rate | 0 ตัน | Single extractor |
Excess dust (ฝุนเกินมาตรฐาน)C06Show verbatim quote (Table 5)ฝุนเกินมาตรฐาน 0.00 | Process defects (scrap and rework) | Defect rate | 0 ตัน | Single extractor |
Burnt pellet (เม็ดไหม)C06Show verbatim quote (Table 5)เม็ดไหม 0.50 | Process defects (scrap and rework) | Defect rate | 0.500 ตัน | Single extractor |
Durability test failure (คาความคงทนไมผาน)C06Show verbatim quote (Table 5)คาความคงทนไมผาน 0.00 | Process defects (scrap and rework) | Defect rate | 0 ตัน | Single extractor |
ReprocessC06Show verbatim quote (Table 5)Reprocess 59.37 | Process defects (scrap and rework) | Defect rate | 59.4 ตัน | Single extractor |
—C06Show verbatim quote (Table 6)C06 74.59 83.22 8.63% | none | OEE | 83.2 % | Single extractor |
—C07Show verbatim quote (Table 6)C07 73.88 85.97 12.09% | none | OEE | 86.0 % | Single extractor |
—MP30Show verbatim quote (Table 6)MP 30 75.42 93.72 18.31% | none | OEE | 93.7 % | Single extractor |
Break DownShow verbatim quote (Figure 3 Pareto Chart for Cause)Bre ak D ow n Machine Adjus tme nt Die Ch an ge Waiting Time C lea rline 38.33 105.00 112.17 149.83 181.67 6.5 17.9 19.1 25.5 30.9 100.0 93.5 75.6 56.5 30.9 | Equipment failure (breakdowns) | Lost time | 38.3 h | Single extractor |
Break DownShow verbatim quote (Figure 3 Pareto Chart for Cause)Bre ak D ow n Machine Adjus tme nt Die Ch an ge Waiting Time C lea rline 38.33 105.00 112.17 149.83 181.67 6.5 17.9 19.1 25.5 30.9 100.0 93.5 75.6 56.5 30.9 | Equipment failure (breakdowns) | Share of lost time | 6.50 % | Single extractor |
Machine AdjustmentShow verbatim quote (Figure 3 Pareto Chart for Cause)Bre ak D ow n Machine Adjus tme nt Die Ch an ge Waiting Time C lea rline 38.33 105.00 112.17 149.83 181.67 6.5 17.9 19.1 25.5 30.9 100.0 93.5 75.6 56.5 30.9 | Setup and adjustments | Lost time | 105 h | Single extractor |
Machine AdjustmentShow verbatim quote (Figure 3 Pareto Chart for Cause)Bre ak D ow n Machine Adjus tme nt Die Ch an ge Waiting Time C lea rline 38.33 105.00 112.17 149.83 181.67 6.5 17.9 19.1 25.5 30.9 100.0 93.5 75.6 56.5 30.9 | Setup and adjustments | Share of lost time | 17.9 % | Single extractor |
Die ChangeShow verbatim quote (Figure 3 Pareto Chart for Cause)Bre ak D ow n Machine Adjus tme nt Die Ch an ge Waiting Time C lea rline 38.33 105.00 112.17 149.83 181.67 6.5 17.9 19.1 25.5 30.9 100.0 93.5 75.6 56.5 30.9 | Setup and adjustments | Lost time | 112 h | Single extractor |
Die ChangeShow verbatim quote (Figure 3 Pareto Chart for Cause)Bre ak D ow n Machine Adjus tme nt Die Ch an ge Waiting Time C lea rline 38.33 105.00 112.17 149.83 181.67 6.5 17.9 19.1 25.5 30.9 100.0 93.5 75.6 56.5 30.9 | Setup and adjustments | Share of lost time | 19.1 % | Single extractor |
Waiting TimeShow verbatim quote (Figure 3 Pareto Chart for Cause)Bre ak D ow n Machine Adjus tme nt Die Ch an ge Waiting Time C lea rline 38.33 105.00 112.17 149.83 181.67 6.5 17.9 19.1 25.5 30.9 100.0 93.5 75.6 56.5 30.9 | Organizational or external stops (material or personnel shortage, utilities outage) | Lost time | 150 h | Single extractor |
Waiting TimeShow verbatim quote (Figure 3 Pareto Chart for Cause)Bre ak D ow n Machine Adjus tme nt Die Ch an ge Waiting Time C lea rline 38.33 105.00 112.17 149.83 181.67 6.5 17.9 19.1 25.5 30.9 100.0 93.5 75.6 56.5 30.9 | Organizational or external stops (material or personnel shortage, utilities outage) | Share of lost time | 25.5 % | Single extractor |
ClearlineShow verbatim quote (Figure 3 Pareto Chart for Cause)Bre ak D ow n Machine Adjus tme nt Die Ch an ge Waiting Time C lea rline 38.33 105.00 112.17 149.83 181.67 6.5 17.9 19.1 25.5 30.9 100.0 93.5 75.6 56.5 30.9 | Setup and adjustments | Lost time | 182 h | Single extractor |
ClearlineShow verbatim quote (Figure 3 Pareto Chart for Cause)Bre ak D ow n Machine Adjus tme nt Die Ch an ge Waiting Time C lea rline 38.33 105.00 112.17 149.83 181.67 6.5 17.9 19.1 25.5 30.9 100.0 93.5 75.6 56.5 30.9 | Setup and adjustments | Share of lost time | 30.9 % | Single extractor |
Observation units
- MP30 · Extrusion · Baseline
- C07 · Extrusion · Baseline
- C06 · Extrusion · Baseline
- C06 · Extrusion · After intervention
- C07 · Extrusion · After intervention
- MP30 · Extrusion · After intervention
- Pelleting machines C06+C07+MP30 (combined, pre-improvement Pareto) · Extrusion · Baseline

