foratvise
Get Started
Process defects (scrap and rework)

Improper container seal (cap/bag sealing defect)

Process defects (scrap and rework)QualityCapping and seaming

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 48 % of the line's lost time. Reported by 2 of the 82 studies that could observe it (limited evidence).

What happens

The capping or sealing head applies insufficient, excessive, or misaligned torque/pressure/heat to the closure (cap, lid, or bag seal), so the seal does not achieve the required hermetic integrity. Contributing factors include worn or misadjusted sealing tooling, incorrect cap or film feed, variable container or closure dimensions, and contamination on the sealing surface.

What is done about it

Perform preventive maintenance and calibration of capping/sealing heads (torque, pressure, temperature settings) and verify tooling wear and alignment against cap and container specifications. Implement in-line leak or seal-integrity checks with automatic rejection and feedback to adjust sealing parameters in real time.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.9% [0.2–2.5%]
Expected share of lost time
0.4% [0.1–1.2%]
Share of lost time when present
48% [37–60%]
Studies / units
82 / 109
Evidence grade
C

Grade C: 2 to 4 studies, or an interval wider than 0.35.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    1.0% [0.1–3.8%]11 studies
  • Soft drinks, bottled water and juices
    0.9% [0.1–2.8%]26 studies
  • Brewing, wine and spirits
    2.0% [0.3–6.5%]11 studies
  • Bakery and pasta
    1.1% [0.1–4.2%]0 studies
  • Meat, poultry and seafood
    1.1% [0.1–3.7%]7 studies
  • Fruit and vegetable processing
    1.1% [0.1–3.7%]4 studies
  • Grain and oilseed milling
    1.1% [0.1–3.8%]3 studies
  • Sugar and confectionery
    1.1% [0.1–4.2%]3 studies
  • Snacks, coffee, tea and other foods
    1.0% [0.1–3.6%]4 studies
  • Animal feed and pet food
    1.1% [0.1–4.1%]4 studies
  • Food manufacturing (unspecified or mixed)
    1.0% [0.1–3.7%]9 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

The capping or sealing head applies insufficient, excessive, or misaligned torque/pressure/heat to the closure (cap, lid, or bag seal), so the seal does not achieve the required hermetic integrity. Contributing factors include worn or misadjusted sealing tooling, incorrect cap or film feed, variable container or closure dimensions, and contamination on the sealing surface.

How it looks in SCADA data

Engineering guidance

Vision or torque-check stations downstream flag rejects for leak, torque-out-of-range, or seal-integrity failure; reject counters at the capper/sealer rise while upstream speed and cycle time remain nominal. MES quality logs show clustered defect codes tied to the capping or sealing station ID without an associated machine fault or stoppage.

Countermeasure

Engineering guidance

Perform preventive maintenance and calibration of capping/sealing heads (torque, pressure, temperature settings) and verify tooling wear and alignment against cap and container specifications. Implement in-line leak or seal-integrity checks with automatic rejection and feedback to adjust sealing parameters in real time.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Number of events: 7.00 Boxes x 12 · as reported: “Improperly sealed bottles”
    Show verbatim quote
    Improperly sealed bottles Average 11 7
  2. Number of events: 11.0 Boxes x 12 · as reported: “Improperly sealed bottles”
    Show verbatim quote
    Improperly sealed bottles Average 11 7
  3. Time between events: 3,598 min · as reported: “BFM”
    Show verbatim quote
    its MTBF is 3597.62 min, and mean monthly failure frequency is 5.08.
  4. Number of events: 61.0 events · as reported: “BFM”
    Show verbatim quote
    Total 61 21 24 22 17 7 11 10 8 181
  5. Lost time: 2,540 min · as reported: “BFM”
    Show verbatim quote
    Total 2540 485 500 560 450 265 225 240 220 5485 224940 2.44%
  6. Defect rate: 16.3 % · as reported: “bag improperly sealed”
    Show verbatim quote
    % of bags improperly sealed | 16.30%
  7. Defect rate: 18.0 % · as reported: “improperly sealed bottles”
    Show verbatim quote
    The main issues concerning the product process include 25% of incorrectly labeled bottles, 18% of improperly sealed bottles, and 12% of reprocessing in the current alcoholic beverage production process.
  8. Number of events: 967 pcs · as reported: “D1 type filling”
    Show verbatim quote
    waste defect D1 type filling of 967 pcs, slanted lid of 1,586 pcs, folded TE of 5,204 pcs, closed perched 479 pcs, broken bride 5,551 pcs and without closed 12,279 pcs.
  9. Number of events: 1,586 pcs · as reported: “slanted lid”
    Show verbatim quote
    waste defect D1 type filling of 967 pcs, slanted lid of 1,586 pcs, folded TE of 5,204 pcs, closed perched 479 pcs, broken bride 5,551 pcs and without closed 12,279 pcs.
  10. Number of events: 5,204 pcs · as reported: “folded TE”
    Show verbatim quote
    waste defect D1 type filling of 967 pcs, slanted lid of 1,586 pcs, folded TE of 5,204 pcs, closed perched 479 pcs, broken bride 5,551 pcs and without closed 12,279 pcs.
  11. Number of events: 479 pcs · as reported: “closed perched”
    Show verbatim quote
    waste defect D1 type filling of 967 pcs, slanted lid of 1,586 pcs, folded TE of 5,204 pcs, closed perched 479 pcs, broken bride 5,551 pcs and without closed 12,279 pcs.
  12. Number of events: 5,551 pcs · as reported: “broken bride”
    Show verbatim quote
    waste defect D1 type filling of 967 pcs, slanted lid of 1,586 pcs, folded TE of 5,204 pcs, closed perched 479 pcs, broken bride 5,551 pcs and without closed 12,279 pcs.
  13. Number of events: 12,279 pcs · as reported: “without closed”
    Show verbatim quote
    waste defect D1 type filling of 967 pcs, slanted lid of 1,586 pcs, folded TE of 5,204 pcs, closed perched 479 pcs, broken bride 5,551 pcs and without closed 12,279 pcs.
  14. Share of loss events: 1.90 % · as reported: “without close”
    Show verbatim quote
    Example : reject without close in week 48 = 2821/11775x100%=1.938089172=1.9%