foratvise
Get Started
Included study

Lean and RCM-Based Production Model to Improve Operational Efficiency in the Production Line of a Peruvian Dairy SME

Open source

1Bibliographic record

Authors
Gustavo Chaccha-Cuicapusa, Marco Antonio Flores-Chavez, Elmer Luis Tupia-De-La-Cruz
Year
2025
Venue
International Journal of Industrial Engineering
Country
Peru
Segment
Dairy products
Process family
Filling and packaging line
Study type
Before/after intervention
Extraction scope
Full text
Size
1 plants · 1 lines · 1 machines
Observation period
365 days
Data collection
manual_logs
Intervention
Show the setting as described by the study
The company ran a factory that made and packaged drinkable yogurt in a variety of ways.

2Risk of bias

Scored with the rubric of the protocol: 2 low concern, 1 some concerns, 0 high concern.
Total score 13Low risk
ItemScore
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events).2 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown.1 / 2
Does the loss breakdown account for the total loss it claims to explain?The reported causes or categories sum to at least 90% of the stated total, or an explicit "other" class closes the balance.2 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Extracted data

Each datum with its classification and the verbatim quote that states it.
Reported causeLoss categoryMetricValueExtraction
—
Show verbatim quote (Section 4.3.3)
It was confirmed that system availability went up by 10.7 percentage points, the OEE of the filling subprocess went up from 60.4% to 70.6%, and the overall production OEE went up to 72.8%, which is an eight-percentage-point increase.
noneOEE72.8 %Both extractors agreed
—
Show verbatim quote (Section 4.2)
This result showed that the average efficiency level over the past twelve months was 67.7%, which is lower than the industry standard.
noneOEE67.7 %Both extractors agreed
—filling machine
Show verbatim quote (Section 4.3.3)
It was confirmed that system availability went up by 10.7 percentage points, the OEE of the filling subprocess went up from 60.4% to 70.6%, and the overall production OEE went up to 72.8%, which is an eight-percentage-point increase.
noneOEE70.6 %Both extractors agreed
product losses during the filling processfilling machine
Show verbatim quote (Section 4.2)
The analysis found two main reasons for this inefficiency: unproductive time during the packaging process, which made up 63% of the problem, and product losses during the filling process, which made up the other 37%.
Process defects (scrap and rework)Share of lost time37.0 %Both extractors agreed
setup time delaysfilling machine
Show verbatim quote (Section 4.2)
The first reason had a lot of problems that caused the filling machine to break down often (55.8% of the problems) and setup time delays (44.2% of the inefficiencies).
Setup and adjustmentsShare of lost time44.2 %Both extractors agreed
—filling machine
Show verbatim quote (Section 4.3.3)
It was confirmed that system availability went up by 10.7 percentage points, the OEE of the filling subprocess went up from 60.4% to 70.6%, and the overall production OEE went up to 72.8%, which is an eight-percentage-point increase.
noneOEE60.4 %Both extractors agreed
—filling machine
Show verbatim quote (Section 4.3.2)
These numbers showed that the system broke down a lot and took a long time to recover, which meant it was only available 69.9% of the time.
noneAvailability69.9 %Both extractors agreed
—filling machine
Show verbatim quote (Section 4.3.2)
The system's Mean Time Between Failures (MTBF) was 3.57 hours, and the Mean Time to Repair (MTTR) was 1.53 hours before it was used.
Equipment failure (breakdowns)Mean event duration1.53 hBoth extractors agreed
—filling machine
Show verbatim quote (Section 4.3.2)
The system's Mean Time Between Failures (MTBF) was 3.57 hours, and the Mean Time to Repair (MTTR) was 1.53 hours before it was used.
Equipment failure (breakdowns)Time between events3.57 hBoth extractors agreed
filling machine break down oftenfilling machine
Show verbatim quote (Section 4.2)
The first reason had a lot of problems that caused the filling machine to break down often (55.8% of the problems) and setup time delays (44.2% of the inefficiencies).
Equipment failure (breakdowns)Share of lost time55.8 %Both extractors agreed
—filling machine
Show verbatim quote (Table 1)
MTTR hour 1.53 0.77 1.5 -2%
Equipment failure (breakdowns)Mean event duration1.50 hBoth extractors agreed
—filling machine
Show verbatim quote (Table 1)
MTBF hour 3.57 5.84 6.23 75%
Equipment failure (breakdowns)Time between events6.23 hBoth extractors agreed
—filling machine
Show verbatim quote (Table 1)
Availability % 69.90% 80% 80.60% 15%
noneAvailability80.6 %Both extractors agreed
setup timefilling machine
Show verbatim quote (Section 4.3.1)
The average setup time alone was 37.5 minutes, which made things much less efficient and cut down on effective working time.
Setup and adjustmentsLost time37.5 minSingle extractor
setup timefilling machine
Show verbatim quote (Figure 2 / Section 4.3.1)
The first setup took 37.3 minutes, but after using the method, it only took 16.3 minutes.
Setup and adjustmentsLost time37.3 minSingle extractor
unproductive time during the packaging processfilling machine
Show verbatim quote (Section 4.2)
The analysis found two main reasons for this inefficiency: unproductive time during the packaging process, which made up 63% of the problem, and product losses during the filling process, which made up the other 37%.
Not classifiable from the reportShare of lost time63.0 %Single extractor
setup timefilling machine
Show verbatim quote (Table 1)
Setup Time minutes 37.5 18.75 16.39 -56%
Setup and adjustmentsLost time16.4 minSingle extractor
setup timefilling machine
Show verbatim quote (Figure 2 / Section 4.3.1)
The first setup took 37.3 minutes, but after using the method, it only took 16.3 minutes.
Setup and adjustmentsLost time16.3 minSingle extractor
—filling machine
Show verbatim quote (Section 4.3.1)
The average setup time alone was 37.5 minutes
Setup and adjustmentsMean event duration37.5 minSingle extractor
—filling machine
Show verbatim quote (Table 1)
Setup Time | minutes | 37.5 | 18.75 | 16.39 | -56%
Setup and adjustmentsMean event duration16.4 minSingle extractor

Observation units

  • Overall production process · Whole line or unspecified equipment · After intervention
  • Overall production process · Whole line or unspecified equipment · Baseline
  • Filling machine (packaging subprocess) · Filling · After intervention
  • Filling machine (packaging subprocess) · Filling · Baseline
  • Packaging line · Filling · Baseline
  • Packaging line · Filling · After intervention