Equipment down under repair
In short
It appears in about 1 of every 100 lines studied.
When it appears, it takes on average about 56 % of the line's lost time. Reported by 2 of the 127 studies that could observe it (limited evidence).
What happens
A machine or line has failed and remains stopped while maintenance technicians diagnose and repair the fault; the duration of the stop depends on fault complexity, spare parts availability and technician response time rather than on the original failure itself. Extended repair durations occur when diagnosis is difficult, parts must be sourced, or multiple sub-systems are affected.
What is done about it
Apply structured root-cause diagnosis tools and maintain critical spare parts inventory to shorten repair cycles, and track mean time to repair by fault type to identify and address recurring bottlenecks in the repair process.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.8% [0.2–2.0%]
- Expected share of lost time
- 0.4% [0.1–1.1%]
- Share of lost time when present
- 56% [45–66%]
- Studies / units
- 127 / 161
- Evidence grade
- C
Grade C: 2 to 4 studies, or an interval wider than 0.35.
2Probability by segment
- Dairy products0.9% [0.1–2.9%]13 studies
- Soft drinks, bottled water and juices1.1% [0.1–3.2%]26 studies
- Brewing, wine and spirits1.3% [0.2–4.4%]11 studies
- Bakery and pasta0.8% [0.1–2.5%]24 studies
- Meat, poultry and seafood0.9% [0.1–3.2%]9 studies
- Fruit and vegetable processing0.9% [0.1–3.2%]7 studies
- Grain and oilseed milling0.9% [0.1–3.1%]6 studies
- Sugar and confectionery0.9% [0.1–3.1%]9 studies
- Snacks, coffee, tea and other foods0.9% [0.1–3.1%]5 studies
- Animal feed and pet food0.9% [0.1–3.1%]7 studies
- Food manufacturing (unspecified or mixed)0.9% [0.1–3.1%]10 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceA machine or line has failed and remains stopped while maintenance technicians diagnose and repair the fault; the duration of the stop depends on fault complexity, spare parts availability and technician response time rather than on the original failure itself. Extended repair durations occur when diagnosis is difficult, parts must be sourced, or multiple sub-systems are affected.
How it looks in SCADA data
Engineering guidanceSCADA/MES shows a sustained machine-down or fault state with no cycling of actuators, often tagged with a maintenance-call or work-order event; the stop duration counter extends well beyond typical fault-clear times, and upstream/downstream equipment shows blocking or starvation states for the same period.
Countermeasure
Engineering guidanceApply structured root-cause diagnosis tools and maintain critical spare parts inventory to shorten repair cycles, and track mean time to repair by fault type to identify and address recurring bottlenecks in the repair process.
4Sources
- Reliability and maintainability analysis to improve the operation of the limoncello production line (2012)Open sourceShare of lost time: 10.7 % · as reported: “under repair”
Show verbatim quote
whereas for the rest 10.65%, the LPL is under repair
- Evaluation of reliability, availability and maintainability of a milk production line (2019)Open sourceShare of lost time: 3.90 % · as reported: “down or under repair”
Show verbatim quote
the availability for the milk production line was 96.13% and the line was down or under repair for 3.9%
- Enhancing Operational Effectiveness in a Beverage Bottling SME through SMED, 5S, and TPM Maintenance Practices (2025)Open sourceShare of lost time: 34.0 % · as reported: “protracted repair durations”
Show verbatim quote
Detailed decomposition of the shortfall reveals that parasitic machine velocity losses exert a 47% share on ineffective output, protracted repair durations 34%, and the necessity for product reprocessing 19%.

