Glass container breakage
In short
It appears in about 1 of every 100 lines studied.
When it appears, it takes on average about 47 % of the line's lost time. Reported by 4 of the 127 studies that could observe it (limited evidence).
What happens
Glass jars or bottles crack or shatter due to mechanical impact, thermal shock, internal pressure surges, or pre-existing manufacturing defects as they are filled, capped, or conveyed, turning the affected units into scrap and often contaminating neighbouring containers.
What is done about it
Inspect and qualify incoming glass containers for cracks or weak points, control line back-pressure and guide-rail alignment, cushion transfer and change-of-direction points, and train operators in rapid, safe glass-breakage clearance and sanitation procedures.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 1.2% [0.3–2.8%]
- Expected share of lost time
- 0.6% [0.2–1.3%]
- Share of lost time when present
- 47% [35–58%]
- Studies / units
- 127 / 161
- Evidence grade
- C
Grade C: 2 to 4 studies, or an interval wider than 0.35.
2Probability by segment
- Dairy products1.3% [0.2–3.9%]13 studies
- Soft drinks, bottled water and juices1.4% [0.3–4.1%]26 studies
- Brewing, wine and spirits1.3% [0.2–4.1%]11 studies
- Bakery and pasta2.1% [0.4–5.9%]24 studies
- Meat, poultry and seafood1.3% [0.2–4.1%]9 studies
- Fruit and vegetable processing1.9% [0.3–6.2%]7 studies
- Grain and oilseed milling1.3% [0.2–4.3%]6 studies
- Sugar and confectionery1.3% [0.2–4.2%]9 studies
- Snacks, coffee, tea and other foods1.3% [0.2–4.5%]5 studies
- Animal feed and pet food1.3% [0.2–4.2%]7 studies
- Food manufacturing (unspecified or mixed)1.3% [0.2–4.1%]10 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceGlass jars or bottles crack or shatter due to mechanical impact, thermal shock, internal pressure surges, or pre-existing manufacturing defects as they are filled, capped, or conveyed, turning the affected units into scrap and often contaminating neighbouring containers.
How it looks in SCADA data
Engineering guidanceLine stoppage or speed reduction coincides with breakage or jam alarms raised at filling, capping or conveyor sections, scrap and reject counters spike sharply, and a manual cleaning or glass-clearance state is logged before the line resumes, while downstream stations show starvation and upstream stations accumulate.
Countermeasure
Engineering guidanceInspect and qualify incoming glass containers for cracks or weak points, control line back-pressure and guide-rail alignment, cushion transfer and change-of-direction points, and train operators in rapid, safe glass-breakage clearance and sanitation procedures.
4Sources
- Production Model Based on Lean Manufacturing, MRP, MPS and TPM to Reduce Losses in a MSE in the Bakery Sector (2023)Open sourceShare of lost time: 25.0 % · as reported: “Stock break”
Show verbatim quote
Out of stock: This decreased thanks to the implementation of the MRP, down from 25% to 19%, with this indicator it was possible to know how much raw material is needed to be able to produce the final product.
- Production Model Based on Lean Manufacturing, MRP, MPS and TPM to Reduce Losses in a MSE in the Bakery Sector (2023)Open sourceShare of lost time: 19.0 % · as reported: “Stock break”
Show verbatim quote
Out of stock: This decreased thanks to the implementation of the MRP, down from 25% to 19%, with this indicator it was possible to know how much raw material is needed to be able to produce the final product.
- The implementation of an integrated Lean Management-HACCP model: application in the food industry in Casablanca,Morocco (2025)Open sourceLost time: 10.0 min · as reported: “Break”
Show verbatim quote
Break 10 min
- Integrated Process Optimization and Defect Analysis to Minimize Glass Jar Breakage in Acidified Gherkin Packaging Lines (2025)Open sourceDefect rate: 3.52 % · as reported: “glass jar breakage”
Show verbatim quote
Post-intervention, the mean defect rate declined from 7.3% to 3.52%, improving line efficiency and reducing waste generation by 35%.
- Integrated Process Optimization and Defect Analysis to Minimize Glass Jar Breakage in Acidified Gherkin Packaging Lines (2025)Open sourceDefect rate: 7.30 % · as reported: “glass jar breakage”
Show verbatim quote
Post-intervention, the mean defect rate declined from 7.3% to 3.52%, improving line efficiency and reducing waste generation by 35%.
- Analisis Pengendalian Kualitas Produk Roti untuk Menurunkan Reject Rate Menggunakan Metode DMAIC dan Poka Yoke (Studi Kasus: Toko Roti Tous Les Jours) (2026)Open sourceShare of loss events: 29.0 % · as reported: “Regular Bread”
Show verbatim quote
65% dari permasalahan cacat produk penyebab utamanya adalah kategori produk yaitu donut 37%) dan regular bread 29%.
- Analisis Pengendalian Kualitas Produk Roti untuk Menurunkan Reject Rate Menggunakan Metode DMAIC dan Poka Yoke (Studi Kasus: Toko Roti Tous Les Jours) (2026)Open sourceNumber of events: 1,822 pcs · as reported: “Regular Bread”
Show verbatim quote
Jumlah 133.573 1.822 918 2.341 607 695 6.383
- Analisis Pengendalian Kualitas Produk Roti untuk Menurunkan Reject Rate Menggunakan Metode DMAIC dan Poka Yoke (Studi Kasus: Toko Roti Tous Les Jours) (2026)Open sourceNumber of events: 918 pcs · as reported: “Savory Bread”
Show verbatim quote
Jumlah 133.573 1.822 918 2.341 607 695 6.383
- Analisis Pengendalian Kualitas Produk Roti untuk Menurunkan Reject Rate Menggunakan Metode DMAIC dan Poka Yoke (Studi Kasus: Toko Roti Tous Les Jours) (2026)Open sourceNumber of events: 607 pcs · as reported: “European Bread”
Show verbatim quote
Jumlah 133.573 1.822 918 2.341 607 695 6.383
- COMPARATIVE ANALYSIS OF PRODUCTION LINE EFFICIENCY UNDER VARYING DEMAND SCENARIOS USING MULTILAYER PERCEPTRON (2026)Open sourceLost time: 5.10 hrs · as reported: “Glass Breakage Handling”
Show verbatim quote
5 Coca- Cola 1L Glass 24 14,000 12,400 5.1 Glass Breakage Handling 74.3 Fragility of packaging material

