foratvise
Get Started
Equipment failure (breakdowns)

Mechanical component failure

Equipment failure (breakdowns)AvailabilityWhole line or unspecified equipment

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 59 % of the line's lost time. Reported by 1 of the 127 studies that could observe it (sparse evidence).

What happens

Wear, fatigue, misalignment or lubrication breakdown in mechanical elements such as bearings, gearboxes, chains, belts, shafts or couplings progressively degrades function until the component breaks or jams, forcing an unplanned stop of the machine for repair. The failure can originate in any mechanically driven unit of the line and typically requires a maintenance technician rather than an operator to restore operation.

What is done about it

Apply condition-based and preventive maintenance on critical mechanical components, including lubrication schedules, vibration and thermal monitoring, and scheduled replacement of wear parts before they reach failure. Standardize spare-parts availability and use root-cause analysis on repeated failures to redesign weak components or adjust maintenance intervals.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.6% [0.1–1.5%]
Expected share of lost time
0.3% [0.1–0.9%]
Share of lost time when present
59% [49–69%]
Studies / units
127 / 161
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.6% [0.1–2.4%]13 studies
  • Soft drinks, bottled water and juices
    0.6% [0.1–2.0%]26 studies
  • Brewing, wine and spirits
    0.6% [0.1–2.4%]11 studies
  • Bakery and pasta
    0.6% [0.1–2.1%]24 studies
  • Meat, poultry and seafood
    0.6% [0.1–2.4%]9 studies
  • Fruit and vegetable processing
    0.7% [0.1–2.5%]7 studies
  • Grain and oilseed milling
    0.7% [0.1–2.5%]6 studies
  • Sugar and confectionery
    0.9% [0.1–3.3%]9 studies
  • Snacks, coffee, tea and other foods
    0.6% [0.1–2.3%]5 studies
  • Animal feed and pet food
    0.6% [0.1–2.4%]7 studies
  • Food manufacturing (unspecified or mixed)
    0.7% [0.1–2.5%]10 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Wear, fatigue, misalignment or lubrication breakdown in mechanical elements such as bearings, gearboxes, chains, belts, shafts or couplings progressively degrades function until the component breaks or jams, forcing an unplanned stop of the machine for repair. The failure can originate in any mechanically driven unit of the line and typically requires a maintenance technician rather than an operator to restore operation.

How it looks in SCADA data

Engineering guidance

The machine state log shows an unplanned down state with a fault or alarm code linked to drive, motor overload, torque limit, position or speed deviation, often preceded by rising vibration, current or temperature trends on the affected drive. Downstream stations show starvation and upstream stations show blocking while the maintenance work order is open, with stop duration extending beyond typical minor-stop limits.

Countermeasure

Engineering guidance

Apply condition-based and preventive maintenance on critical mechanical components, including lubrication schedules, vibration and thermal monitoring, and scheduled replacement of wear parts before they reach failure. Standardize spare-parts availability and use root-cause analysis on repeated failures to redesign weak components or adjust maintenance intervals.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Time between events: 6.09 log(min) · as reported: “Mechanical Maintenance”
    Show verbatim quote
    Mechanical Maintenance 290 6.0876 (5.8855; 6.2898)
  2. Number of events: 290 events · as reported: “Mechanical Maintenance”
    Show verbatim quote
    Mechanical Maintenance 290 6.0876 (5.8855; 6.2898)
  3. Number of events: 104 events · as reported: “Mechanical Maintenance (MECN)”
    Show verbatim quote
    MECN 104 202,9 319,6 102155,8 74,4
  4. Mean event duration: 203 min · as reported: “Mechanical Maintenance (MECN)”
    Show verbatim quote
    MECN 104 202,9 319,6 102155,8 74,4
  5. Lost time: 20.0 h · as reported: “mechanical maintenance failures”
    Show verbatim quote
    view the decrease in machine downtime due to mechanical maintenance failures, which was 54 hours approximately, reducing to 20 hours, in a period of next comparison.
  6. Lost time: 54.0 h · as reported: “mechanical maintenance failures”
    Show verbatim quote
    view the decrease in machine downtime due to mechanical maintenance failures, which was 54 hours approximately, reducing to 20 hours, in a period of next comparison.