Tool/material search time due to lack of visual workplace organization
In short
It appears in about 1 of every 100 lines studied.
When it appears, it takes on average about 57 % of the line's lost time. Reported by 1 of the 127 studies that could observe it (sparse evidence).
What happens
Operators or technicians lose production time looking for tools, spare parts or changeover components because the workplace lacks visual management practices such as labeled storage locations, shadow boards or standardized kits. The absence of a clear place for each item forces ad hoc searching whenever a tool or part is needed, interrupting the work in progress.
What is done about it
Implement visual workplace organization practices such as dedicated shadow boards, labeled storage for tools and changeover parts, point-of-use kits and standardized carts placed near the equipment. Visual indicators and periodic audits help sustain the discipline and shorten retrieval time.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.5% [0.1–1.4%]
- Expected share of lost time
- 0.3% [0.1–0.8%]
- Share of lost time when present
- 57% [46–67%]
- Studies / units
- 127 / 161
- Evidence grade
- D
Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.
2Probability by segment
- Dairy products0.6% [0.1–2.2%]13 studies
- Soft drinks, bottled water and juices0.5% [0.1–1.8%]26 studies
- Brewing, wine and spirits0.6% [0.1–2.3%]11 studies
- Bakery and pasta0.8% [0.1–3.0%]24 studies
- Meat, poultry and seafood0.6% [0.1–2.3%]9 studies
- Fruit and vegetable processing0.6% [0.1–2.3%]7 studies
- Grain and oilseed milling0.6% [0.1–2.3%]6 studies
- Sugar and confectionery0.6% [0.1–2.1%]9 studies
- Snacks, coffee, tea and other foods0.6% [0.1–2.4%]5 studies
- Animal feed and pet food0.6% [0.1–2.4%]7 studies
- Food manufacturing (unspecified or mixed)0.6% [0.1–2.3%]10 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceOperators or technicians lose production time looking for tools, spare parts or changeover components because the workplace lacks visual management practices such as labeled storage locations, shadow boards or standardized kits. The absence of a clear place for each item forces ad hoc searching whenever a tool or part is needed, interrupting the work in progress.
How it looks in SCADA data
Engineering guidanceThis cause rarely triggers machine alarms; it appears instead as operator-logged downtime with generic reasons like search or waiting, as idle or manual-mode states with no associated fault code, or as gaps between the end of one task and the recorded start of the next without any equipment state change. It is typically captured only through manual annotations or MES downtime reason codes rather than automatic sensor signals.
Countermeasure
Engineering guidanceImplement visual workplace organization practices such as dedicated shadow boards, labeled storage for tools and changeover parts, point-of-use kits and standardized carts placed near the equipment. Visual indicators and periodic audits help sustain the discipline and shorten retrieval time.
4Sources
- Integrating Lean Manufacturing and TPM for Process Optimization in Bakery SMEs: A Case Study from Peru (2024)Open sourceLost time: 77.0 minutes · as reported: “searching for production tools and materials”
Show verbatim quote
the time spent searching for tools decreased from an average of 77 minutes per shift to 29 minutes, a 62% reduction
- Integrating Lean Manufacturing and TPM for Process Optimization in Bakery SMEs: A Case Study from Peru (2024)Open sourceLost time: 29.0 minutes · as reported: “searching for production tools and materials - after 5S implementation”
Show verbatim quote
the time spent searching for tools decreased from an average of 77 minutes per shift to 29 minutes, a 62% reduction
- Productivity Improvement Through the Application of Lean Six Sigma Tools in a Non-Alcoholic Beverage Company (2025)Open sourceLost time: 17,472 min/year · as reported: “tool search”
Show verbatim quote
During the diagnostic phase, 17,472 annual minutes were identified as being associated with tool search activities, equivalent to 10.87% of total working time.
- Productivity Improvement Through the Application of Lean Six Sigma Tools in a Non-Alcoholic Beverage Company (2025)Open sourceShare of lost time: 10.9 % · as reported: “tool search”
Show verbatim quote
During the diagnostic phase, 17,472 annual minutes were identified as being associated with tool search activities, equivalent to 10.87% of total working time.
- Production Management Model Based on Lean Manufacturing Tools and SLP to Increase Productivity in a Meatball (BARF) Plant (2026)Open sourceLost time: 5.77 min · as reported: “Search time due to lack of visual control”
Show verbatim quote
Search time due to lack of visual control 5.77 min 2.77 min -3.00 min
- Production Management Model Based on Lean Manufacturing Tools and SLP to Increase Productivity in a Meatball (BARF) Plant (2026)Open sourceLost time: 2.77 min · as reported: “Search time due to lack of visual control”
Show verbatim quote
Search time due to lack of visual control 5.77 min 2.77 min -3.00 min

