foratvise
Get Started
not classifiable

Unspecified production or food waste

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 55 % of the line's lost time. Reported by 3 of the 127 studies that could observe it (limited evidence).

What happens

Labels report aggregate 'waste' or 'loss' figures for the line, product, or research activity without identifying the specific equipment, process step, or failure mode responsible. The underlying physical causes may include off-spec product, spillage, trial or R&D material, or discarded packaging, but the primary source does not disaggregate them.

What is done about it

Introduce standardized waste tracking with mandatory reason coding at the point of disposal, linking each waste event to the originating process step and equipment so that the aggregate figure can later be disaggregated into actionable causes.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
1.0% [0.3–2.3%]
Expected share of lost time
0.5% [0.1–1.3%]
Share of lost time when present
55% [42–65%]
Studies / units
127 / 161
Evidence grade
C

Grade C: 2 to 4 studies, or an interval wider than 0.35.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    1.5% [0.2–4.9%]13 studies
  • Soft drinks, bottled water and juices
    1.3% [0.2–3.7%]26 studies
  • Brewing, wine and spirits
    1.1% [0.1–3.8%]11 studies
  • Bakery and pasta
    1.3% [0.2–3.9%]24 studies
  • Meat, poultry and seafood
    1.1% [0.1–3.6%]9 studies
  • Fruit and vegetable processing
    1.1% [0.2–3.7%]7 studies
  • Grain and oilseed milling
    1.1% [0.2–3.7%]6 studies
  • Sugar and confectionery
    1.1% [0.2–3.6%]9 studies
  • Snacks, coffee, tea and other foods
    1.1% [0.2–3.7%]5 studies
  • Animal feed and pet food
    1.1% [0.1–3.7%]7 studies
  • Food manufacturing (unspecified or mixed)
    1.1% [0.1–3.8%]10 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Labels report aggregate 'waste' or 'loss' figures for the line, product, or research activity without identifying the specific equipment, process step, or failure mode responsible. The underlying physical causes may include off-spec product, spillage, trial or R&D material, or discarded packaging, but the primary source does not disaggregate them.

How it looks in SCADA data

Engineering guidance

No single SCADA/MES tag corresponds to this cause; it typically appears as a manually entered or periodically reported waste quantity (mass, units, or bags) in production logs or MES scrap totals rather than as a discrete machine-state or alarm event.

Countermeasure

Engineering guidance

Introduce standardized waste tracking with mandatory reason coding at the point of disposal, linking each waste event to the originating process step and equipment so that the aggregate figure can later be disaggregated into actionable causes.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Defect rate: 4.85 % · as reported: “Waste”
    Show verbatim quote
    Waste % 4.85%
  2. Defect rate: 6.50 % · as reported: “food losses and waste”
    Show verbatim quote
    food waste in yogurt production processes was reduced, going from 6.5% to 2.5%.
  3. Defect rate: 2.50 % · as reported: “food losses and waste”
    Show verbatim quote
    food waste in yogurt production processes was reduced, going from 6.5% to 2.5%.
  4. Number of events: 56.0 units · as reported: “Bags wasted”
    Show verbatim quote
    Bags wasted (units) 83 56 -32.53%
  5. Number of events: 83.0 units · as reported: “Bags wasted”
    Show verbatim quote
    Bags wasted (units) 83 56 -32.53%
  6. Share of planned time: 8.76 % · as reported: “time waste”
    Show verbatim quote
    Implementation led to a 13% reduction in food waste, from 1.13% to 0.983%, 5% increase in OEE, from 52.6% to 55.4%, and a 31.6% reduction in time waste, dropping from 12.8% to 8.76%, successfully meeting the project objectives.
  7. Defect rate: 0.420 % · as reported: “total food waste”
    Show verbatim quote
    total waste increased from 85,252 kg (0.42%) in 2022 to 286,723.99 kg (1.48%) in 2024, representing a 236% increase, while downtime increased from 106.26 hours to 244.17 hours, despite production levels remaining relatively stable at around 20 million units.
  8. Defect rate: 1.48 % · as reported: “total food waste”
    Show verbatim quote
    total waste increased from 85,252 kg (0.42%) in 2022 to 286,723.99 kg (1.48%) in 2024, representing a 236% increase, while downtime increased from 106.26 hours to 244.17 hours, despite production levels remaining relatively stable at around 20 million units.
  9. Defect rate: 85,252 kg · as reported: “total food waste”
    Show verbatim quote
    total waste increased from 85,252 kg (0.42%) in 2022 to 286,723.99 kg (1.48%) in 2024, representing a 236% increase, while downtime increased from 106.26 hours to 244.17 hours, despite production levels remaining relatively stable at around 20 million units.
  10. Defect rate: 286,724 kg · as reported: “total food waste”
    Show verbatim quote
    Total food waste in the bun production line was 286,723.99 kg in 2024, representing approximately 1.5% of total production.
  11. Defect rate: 1.50 % · as reported: “total food waste”
    Show verbatim quote
    Total food waste in the bun production line was 286,723.99 kg in 2024, representing approximately 1.5% of total production.
  12. Defect rate: 182,539 kg · as reported: “total food waste”
    Show verbatim quote
    Over the course of ten months in 2024, the total food waste amounted to 182,539 kg.
  13. Defect rate: 37.7 % · as reported: “production waste”
    Show verbatim quote
    It is categorized into three primary sources: production waste at 37.7%, breakdown waste at 61.7%, and R&D waste at 0.6%.
  14. Defect rate: 0.600 % · as reported: “R&D waste”
    Show verbatim quote
    It is categorized into three primary sources: production waste at 37.7%, breakdown waste at 61.7%, and R&D waste at 0.6%.
  15. Defect rate: 1,159 kg · as reported: “R&D waste”
    Show verbatim quote
    R&D waste, though minor at 1,158.98 kg in January 2024, represented 6.55% of experimental activity waste in the month.
  16. Share of lost time: 6.55 % · as reported: “R&D waste”
    Show verbatim quote
    R&D waste, though minor at 1,158.98 kg in January 2024, represented 6.55% of experimental activity waste in the month.
  17. Defect rate: 1.13 % · as reported: “food waste”
    Show verbatim quote
    Implementation resulted in a reduction of 24.8% in food waste, from 1.5% to 1.13%, and a 7.11% increase in OEE, from 48% to 52.6%.
  18. Defect rate: 0.983 % · as reported: “food waste”
    Show verbatim quote
    Implementation led to a 13% reduction in food waste, from 1.13% to 0.983%, 5% increase in OEE, from 52.6% to 55.4%, and a 31.6% reduction in time waste, dropping from 12.8% to 8.76%, successfully meeting the project objectives.