Maintenance Program Downtime (Planned and Reactive)
In short
It appears in about 2 of every 100 lines studied.
When it appears, it takes on average about 57 % of the line's lost time. Reported by 5 of the 127 studies that could observe it (good evidence).
What happens
Production stops occur because equipment or civil structures are taken out of service for scheduled preventive or condition-based maintenance tasks, or unexpectedly for reactive repairs when the maintenance strategy fails to anticipate a failure. Coordination activities such as maintenance planning meetings also occupy line time without producing output. The underlying driver is the plant's overall maintenance policy, which determines the split between planned interventions and unplanned, failure-driven stops.
What is done about it
Strengthen the maintenance strategy by shifting the balance from reactive repair toward preventive and condition-based maintenance, and plan maintenance windows, meetings and civil works to minimize their impact on scheduled production. Track maintenance KPIs such as planned versus unplanned downtime ratios to continuously refine the maintenance management program.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 1.6% [0.5–3.6%]
- Expected share of lost time
- 0.9% [0.3–2.0%]
- Share of lost time when present
- 57% [46–67%]
- Studies / units
- 127 / 161
- Evidence grade
- B
Grade B: 5 to 9 studies, or an interval width between 0.20 and 0.35.
2Probability by segment
- Dairy products1.7% [0.3–5.3%]13 studies
- Soft drinks, bottled water and juices1.8% [0.3–5.1%]26 studies
- Brewing, wine and spirits2.3% [0.4–6.9%]11 studies
- Bakery and pasta1.4% [0.2–4.1%]24 studies
- Meat, poultry and seafood1.7% [0.3–5.5%]9 studies
- Fruit and vegetable processing1.7% [0.3–5.3%]7 studies
- Grain and oilseed milling1.7% [0.3–5.5%]6 studies
- Sugar and confectionery2.3% [0.4–7.3%]9 studies
- Snacks, coffee, tea and other foods1.7% [0.3–5.5%]5 studies
- Animal feed and pet food2.4% [0.4–7.5%]7 studies
- Food manufacturing (unspecified or mixed)2.4% [0.4–8.0%]10 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceProduction stops occur because equipment or civil structures are taken out of service for scheduled preventive or condition-based maintenance tasks, or unexpectedly for reactive repairs when the maintenance strategy fails to anticipate a failure. Coordination activities such as maintenance planning meetings also occupy line time without producing output. The underlying driver is the plant's overall maintenance policy, which determines the split between planned interventions and unplanned, failure-driven stops.
How it looks in SCADA data
Engineering guidanceSCADA/MES logs show machine-state transitions to maintenance or stopped states tagged with work-order, PM-code or meeting references, with a mix of short recurring scheduled blocks and longer irregular reactive events. Stop reason codes point to maintenance activities or administrative coordination rather than to a specific component failure mode, and downtime clusters around maintenance calendars or condition-monitoring alerts.
Countermeasure
Engineering guidanceStrengthen the maintenance strategy by shifting the balance from reactive repair toward preventive and condition-based maintenance, and plan maintenance windows, meetings and civil works to minimize their impact on scheduled production. Track maintenance KPIs such as planned versus unplanned downtime ratios to continuously refine the maintenance management program.
4Sources
- Penerapan Total Productive Maintenance (TPM) Pada Pabrik Gula Rafinasi di Indonesia (Studi Kasus: PT. XYZ) (2019)Open sourceMean event duration: 13.6 jam · as reported: “condition based maintenance (PM02)”
Show verbatim quote
Kegiatan PM 02 memerlukan waktu rata-rata 13,6 jam.
- Implementation of Computerized Maintenance and Management System in Wine Factory in Ethiopia: A Case Study (2020)Open sourceShare of lost time: 27.0 % · as reported: “maintenance strategy followed by the plant”
Show verbatim quote
the main causes of the losses in production are stated as mechanical failure in washing section which covers the largest portion (35%), maintenance strategy followed by the plant (27%), maintenance management program (25%), and high cost of maintenance inventory control, and other (13%).
- Implementation of Computerized Maintenance and Management System in Wine Factory in Ethiopia: A Case Study (2020)Open sourceShare of lost time: 25.0 % · as reported: “maintenance management program”
Show verbatim quote
the main causes of the losses in production are stated as mechanical failure in washing section which covers the largest portion (35%), maintenance strategy followed by the plant (27%), maintenance management program (25%), and high cost of maintenance inventory control, and other (13%).
- Strategic formulation of industrial maintenance based on equipment reliability in a sugar and ethanol production plant (2020)Open sourceTime between events: 7.53 log(min) · as reported: “Civil Maintenance”
Show verbatim quote
Civil Maintenance 2 7.534 (5.100; 9.969)
- Maintenance Performance Evaluation and Downtime Analysis of Manufacturing Equipment in a Food Manufacturing Company (2021)Open sourceLost time: 42,723 min · as reported: “Scheduled Maintenance”
Show verbatim quote
Scheduled Maintenance 42723 40.82 40.82
- Maintenance Performance Evaluation and Downtime Analysis of Manufacturing Equipment in a Food Manufacturing Company (2021)Open sourceShare of lost time: 40.8 % · as reported: “Scheduled Maintenance”
Show verbatim quote
Scheduled Maintenance 42723 40.82 40.82
- Maintenance Performance Evaluation and Downtime Analysis of Manufacturing Equipment in a Food Manufacturing Company (2021)Open sourceLost time: 9,723 min · as reported: “Maintenance job meetings”
Show verbatim quote
Maintenance job meetings 9723 9.29 93.3
- Maintenance Performance Evaluation and Downtime Analysis of Manufacturing Equipment in a Food Manufacturing Company (2021)Open sourceShare of lost time: 9.29 % · as reported: “Maintenance job meetings”
Show verbatim quote
Maintenance job meetings 9723 9.29 93.3
- Production Model to increase OEE through the application of Lean Manufacturing and Total Production Maintenance tools in animal feed manufacturing SMEs (2023)Open sourceShare of lost time: 50.2 % · as reported: “maintenance problems”
Show verbatim quote
there is a 50.16% for maintenance problems, which is shown in the graphic it is the cause possessing the highest percentage, affecting more the company performance on the productive part.
- Production Model to increase OEE through the application of Lean Manufacturing and Total Production Maintenance tools in animal feed manufacturing SMEs (2023)Open sourceLost time: 1,340 h · as reported: “Reactive Maintenance”
Show verbatim quote
Reactive Maintenance Man-Hours 1340 11,390
- COMPARATIVE ANALYSIS OF PRODUCTION LINE EFFICIENCY UNDER VARYING DEMAND SCENARIOS USING MULTILAYER PERCEPTRON (2026)Open sourceLost time: 7.00 hrs · as reported: “Routine maintenance”
Show verbatim quote
Glass Washer Line 5 Routine Maintenance May 7 5.1 2.8 ₦360,000 6.0

