foratvise
Get Started
Idling and minor stops (micro-stops)

Human error in calibration or operation

Idling and minor stops (micro-stops)PerformanceWhole line or unspecified equipment

In short

It appears in fewer than 1 of every 100 lines studied.

When it appears, it takes on average about 53 % of the line's lost time. Reported by 0 of the 127 studies that could observe it (sparse evidence).

What happens

An operator sets a wrong parameter, mis-calibrates a sensor or instrument, or performs an incorrect manual action during operation, causing the equipment to stop, trip or run out of tolerance until the error is detected and corrected. The event is driven by human judgement or skill variability rather than by a component fault.

What is done about it

Standardize operating and calibration procedures, add poka-yoke or interlocks that prevent invalid parameter entry, and reinforce operator training and periodic competency checks on critical settings and instruments.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.3% [0.1–1.0%]
Expected share of lost time
0.2% [0.0–0.5%]
Share of lost time when present
53% [41–64%]
Studies / units
127 / 161
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.4% [0.0–1.5%]13 studies
  • Soft drinks, bottled water and juices
    0.4% [0.0–1.4%]26 studies
  • Brewing, wine and spirits
    0.4% [0.0–1.5%]11 studies
  • Bakery and pasta
    0.4% [0.0–1.4%]24 studies
  • Meat, poultry and seafood
    0.4% [0.0–1.5%]9 studies
  • Fruit and vegetable processing
    0.4% [0.0–1.5%]7 studies
  • Grain and oilseed milling
    0.4% [0.0–1.7%]6 studies
  • Sugar and confectionery
    0.4% [0.0–1.6%]9 studies
  • Snacks, coffee, tea and other foods
    0.4% [0.0–1.5%]5 studies
  • Animal feed and pet food
    0.4% [0.0–1.5%]7 studies
  • Food manufacturing (unspecified or mixed)
    0.4% [0.0–1.4%]10 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

An operator sets a wrong parameter, mis-calibrates a sensor or instrument, or performs an incorrect manual action during operation, causing the equipment to stop, trip or run out of tolerance until the error is detected and corrected. The event is driven by human judgement or skill variability rather than by a component fault.

How it looks in SCADA data

Engineering guidance

Short unplanned stop or alarm with no associated maintenance work order, often preceded by a manual parameter change, mode switch or operator intervention logged in the event history; the machine resumes quickly once the operator corrects the setting, and no recurring fault code points to a specific component.

Countermeasure

Engineering guidance

Standardize operating and calibration procedures, add poka-yoke or interlocks that prevent invalid parameter entry, and reinforce operator training and periodic competency checks on critical settings and instruments.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Share of loss events: 8.47 % · as reported: “Breakdowns due to human errors in calibration or operation”
    Show verbatim quote
    Breakdowns due to human errors in calibration or operation | 8.47% | 38.38%
  2. Share of loss events: 8.47 % · as reported: “Breakdowns due to human errors in calibration or operation”
    Show verbatim quote
    Breakdowns due to human errors in calibration or operation 8.47%
  3. Share of lost time: 4.21 % · as reported: “Errores humanos”
    Show verbatim quote
    Errores humanos 977.64 4.21% 94.34%
  4. Lost time: 978 min · as reported: “Errores humanos”
    Show verbatim quote
    Errores humanos 977.64 4.21% 94.34%
  5. Lost time: 6.00 min · as reported: “Erro humano”
    Show verbatim quote
    Erro humano 1 60 48,20 € 6
  6. Number of events: 1.00 events · as reported: “Erro humano”
    Show verbatim quote
    Erro humano 1 60 48,20 € 6