foratvise
Get Started
Included study

ANALISIS PRODUKTIVITAS MESIN PRESS DENGAN PENDEKATAN OVERALL EQUIPMENT EFFECTIVENESS(OEE) PADAPT. JAPFA COMFEED INDONESIA LAMPUNG

Open source

1Bibliographic record

Authors
Melani Anggraini, Emy Khikmawati, Heni Widiastuti
Year
2017
Venue
Jurnal Rekayasa Teknologi dan Sains
Country
Indonesia
Segment
Animal feed and pet food
Process family
Forming, baking and cooking
Study type
Single case study
Extraction scope
Full text
Size
1 plants · 1 lines · 1 machines
Observation period
730 days
Data collection
manual_logs
Intervention
Show the setting as described by the study
Mesin press merupakan mesin yang digunakan untuk membentuk pakan menjadi bentuk pellet dan remah (crumble).

2Risk of bias

Scored with the rubric of the protocol: 2 low concern, 1 some concerns, 0 high concern.
Total score 13Low risk
ItemScore
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events).2 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown.1 / 2
Does the loss breakdown account for the total loss it claims to explain?The reported causes or categories sum to at least 90% of the stated total, or an explicit "other" class closes the balance.2 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points.2 / 2
Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration.1 / 2

3Extracted data

Each datum with its classification and the verbatim quote that states it.
Reported causeLoss categoryMetricValueExtraction
Idling & minor stoppages lossesmesin press
Show verbatim quote (Tabel 5)
Idling & minor stoppages losses 8,30 2,50 97,39
Idling and minor stops (micro-stops)Share of lost time2.50 %Both extractors agreed
Idling & minor stoppages lossesmesin press
Show verbatim quote (Tabel 5)
Idling & minor stoppages losses 8,30 2,50 97,39
Idling and minor stops (micro-stops)Lost time8.30 jamBoth extractors agreed
Setup and adjusment lossesmesin press
Show verbatim quote (Tabel 5)
Setup and adjusment losses 6,00 1,82 99,21
Setup and adjustmentsShare of lost time1.82 %Both extractors agreed
Setup and adjusment lossesmesin press
Show verbatim quote (Tabel 5)
Setup and adjusment losses 6,00 1,82 99,21
Setup and adjustmentsLost time6.00 jamBoth extractors agreed
Breakdowns lossesmesin press
Show verbatim quote (Tabel 5)
Breakdowns losses 31,42 9,49 94,89
Equipment failure (breakdowns)Share of lost time9.49 %Both extractors agreed
Breakdowns lossesmesin press
Show verbatim quote (Tabel 5)
Breakdowns losses 31,42 9,49 94,89
Equipment failure (breakdowns)Lost time31.4 jamBoth extractors agreed
Rework lossesmesin press
Show verbatim quote (Tabel 5)
Rework losses 2,60 0,79 100
Process defects (scrap and rework)Share of lost time0.790 %Both extractors agreed
Rework lossesmesin press
Show verbatim quote (Tabel 5)
Rework losses 2,60 0,79 100
Process defects (scrap and rework)Lost time2.60 jamBoth extractors agreed
Scrap lossesmesin press
Show verbatim quote (Tabel 5)
Scrap losses 0 0 100
Process defects (scrap and rework)Share of lost time0 %Both extractors agreed
Scrap lossesmesin press
Show verbatim quote (Tabel 5)
Scrap losses 0 0 100
Process defects (scrap and rework)Lost time0 jamBoth extractors agreed
—mesin press
Show verbatim quote (Tabel 3)
Rata-Rata 97,94 90,74 100 88,86
noneQuality100 %Both extractors agreed
—mesin press
Show verbatim quote (Tabel 3)
Rata-Rata 97,94 90,74 100 88,86
nonePerformance90.7 %Both extractors agreed
—mesin press
Show verbatim quote (Tabel 3)
Rata-Rata 97,94 90,74 100 88,86
noneAvailability97.9 %Both extractors agreed
—mesin press
Show verbatim quote (Tabel 3)
Rata-Rata 97,94 90,74 100 88,86
noneOEE88.9 %Both extractors agreed
—mesin press
Show verbatim quote (Tabel 2)
Rata-Rata 96,68 75,67 100 73,18
noneQuality100 %Both extractors agreed
—mesin press
Show verbatim quote (Tabel 2)
Rata-Rata 96,68 75,67 100 73,18
nonePerformance75.7 %Both extractors agreed
—mesin press
Show verbatim quote (Tabel 2)
Rata-Rata 96,68 75,67 100 73,18
noneAvailability96.7 %Both extractors agreed
—mesin press
Show verbatim quote (Tabel 2)
Rata-Rata 96,68 75,67 100 73,18
noneOEE73.2 %Both extractors agreed
Reduced speed lossesmesin press
Show verbatim quote (Section 4, after Gambar 6; Tabel 5)
faktor tertinggi untuk total time losses yaitu pada reduced speed losses sebesar 282,85 jam atau 85,40%
Reduced speedShare of lost time85.4 %Both extractors agreed
Reduced speed lossesmesin press
Show verbatim quote (Section 4, after Gambar 6; Tabel 5)
faktor tertinggi untuk total time losses yaitu pada reduced speed losses sebesar 282,85 jam atau 85,40%
Reduced speedLost time283 jamBoth extractors agreed

Observation units

  • Mesin Press (tahun 2014, kapasitas 20 ton/jam) · Forming, moulding and depositing · Baseline
  • Mesin Press (tahun 2015, kapasitas 15 ton/jam) · Forming, moulding and depositing · After intervention