foratvise
Get Started
planned downtime

Scheduled preventive maintenance

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 57 % of the line's lost time. Reported by 3 of the 127 studies that could observe it (limited evidence).

What happens

The line or machine is deliberately stopped according to a maintenance plan so that technicians can inspect, lubricate, adjust or replace components before they fail, rather than in response to an actual breakdown. The stop is scheduled in advance and is not triggered by a process deviation or equipment fault.

What is done about it

Optimise the preventive maintenance schedule and task scope using reliability data (e.g., condition-based or predictive triggers) so that intervention windows are as short and infrequent as possible while still preventing failures. Coordinate maintenance windows across the line and use quick-change or modular components to minimise the duration of each planned stop.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.8% [0.2–1.9%]
Expected share of lost time
0.4% [0.1–1.1%]
Share of lost time when present
57% [46–67%]
Studies / units
127 / 161
Evidence grade
C

Grade C: 2 to 4 studies, or an interval wider than 0.35.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.8% [0.1–3.0%]13 studies
  • Soft drinks, bottled water and juices
    1.0% [0.2–3.1%]26 studies
  • Brewing, wine and spirits
    0.9% [0.1–3.0%]11 studies
  • Bakery and pasta
    0.7% [0.1–2.5%]24 studies
  • Meat, poultry and seafood
    0.8% [0.1–3.0%]9 studies
  • Fruit and vegetable processing
    0.9% [0.1–2.9%]7 studies
  • Grain and oilseed milling
    0.9% [0.1–3.3%]6 studies
  • Sugar and confectionery
    0.8% [0.1–2.9%]9 studies
  • Snacks, coffee, tea and other foods
    0.9% [0.1–3.1%]5 studies
  • Animal feed and pet food
    1.3% [0.2–4.5%]7 studies
  • Food manufacturing (unspecified or mixed)
    0.8% [0.1–3.0%]10 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

The line or machine is deliberately stopped according to a maintenance plan so that technicians can inspect, lubricate, adjust or replace components before they fail, rather than in response to an actual breakdown. The stop is scheduled in advance and is not triggered by a process deviation or equipment fault.

How it looks in SCADA data

Engineering guidance

SCADA/MES logs show a machine-state transition to a planned stop or maintenance state, often linked to a work order ID, occurring at a predictable time window with no preceding alarm cascade. Downstream and upstream equipment typically show a coordinated, scheduled idle or starved/blocked state rather than an abrupt unplanned trip.

Countermeasure

Engineering guidance

Optimise the preventive maintenance schedule and task scope using reliability data (e.g., condition-based or predictive triggers) so that intervention windows are as short and infrequent as possible while still preventing failures. Coordinate maintenance windows across the line and use quick-change or modular components to minimise the duration of each planned stop.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 12.0 h · as reported: “Hours of preventive maintenance (scheduled), Month 2”
    Show verbatim quote
    Month 2 12.00 20.00 8.00
  2. Lost time: 14.0 h · as reported: “Hours of preventive maintenance (scheduled), Month 1”
    Show verbatim quote
    Month 1 14.00 25.00 11.00
  3. Lost time: 20.0 h · as reported: “Hours of factual preventive maintenance, Month 2”
    Show verbatim quote
    Month 2 12.00 20.00 8.00
  4. Lost time: 25.0 h · as reported: “Hours of factual preventive maintenance, Month 1”
    Show verbatim quote
    Month 1 14.00 25.00 11.00
  5. Share of planned time: 2.89 % · as reported: “Preventive Maintenance”
    Show verbatim quote
    Jika kita lihat total waktu Preventive Maintenance (PM) selama 1.905 menit terhadap waktu operasional yang 65.880 menit atau 2,89% dari waktu operasional dan waktu setup 1,890 menit atau 2,87% dari waktu operasional
  6. Lost time: 1,905 min · as reported: “Preventive Maintenance”
    Show verbatim quote
    Selama rentang waktu tersebut waktu operasional adalah 65.880 menit, preventive maintenance 1.905 menit, setup 1.890 menit dan breakdown 960 menit , maka persen availabilitynya adalah
  7. Lost time: 25.0 h · as reported: “Hours of factual preventive maintenance - Month 1”
    Show verbatim quote
    Month 1 14.00 25.00 11.00
  8. Lost time: 20.0 h · as reported: “Hours of factual preventive maintenance - Month 2”
    Show verbatim quote
    Month 2 12.00 20.00 8.00
  9. Mean event duration: 2.38 h · as reported: “preventive maintenance”
    Show verbatim quote
    the preventive maintenance MTTR decreased from 3.38 h to 2.38 h
  10. Mean event duration: 3.38 h · as reported: “preventive maintenance”
    Show verbatim quote
    the preventive maintenance MTTR decreased from 3.38 h to 2.38 h
  11. Share of lost time: 31.5 % · as reported: “Preventive maintenance”
    Show verbatim quote
    2 Preventive maintenance 423.00 31.52 86.24 Vital few
  12. Lost time: 423 hrs · as reported: “Preventive maintenance”
    Show verbatim quote
    2 Preventive maintenance 423.00 31.52 86.24 Vital few
  13. Lost time: 10.0 hrs · as reported: “Preventive maintenance”
    Show verbatim quote
    Filler Machine Line 1 Preventive Jan 10 2.5 1.2 ₦250,000 3.0
  14. Lost time: 8.00 hrs · as reported: “Preventive maintenance”
    Show verbatim quote
    Labeller Line 3 Preventive Mar 8 1.5 1.0 ₦185,000 2.0