foratvise
Get Started
Process defects (scrap and rework)

Product scrap and rejection

Process defects (scrap and rework)QualityWhole line or unspecified equipment

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 49 % of the line's lost time. Reported by 4 of the 127 studies that could observe it (limited evidence).

What happens

Units produced during otherwise stable running fail to meet specification (weight, seal, shape, wrap or appearance) because of minor material misbehavior such as product sticking, folding or wrapping incorrectly around forming, cutting or packaging elements, and are removed from the line as scrap or rework.

What is done about it

Tighten in-process monitoring and quick-clear procedures at the forming, cutting or wrapping station, adjust guides, tooling and material tension to prevent sticking or misforming, and reinforce operator checks and minor-stop logging so root causes of scrap are tracked and corrected.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
1.3% [0.4–2.9%]
Expected share of lost time
0.6% [0.2–1.4%]
Share of lost time when present
49% [38–60%]
Studies / units
127 / 161
Evidence grade
C

Grade C: 2 to 4 studies, or an interval wider than 0.35.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    1.4% [0.2–4.4%]13 studies
  • Soft drinks, bottled water and juices
    1.1% [0.2–3.3%]26 studies
  • Brewing, wine and spirits
    1.4% [0.2–4.3%]11 studies
  • Bakery and pasta
    1.6% [0.3–4.6%]24 studies
  • Meat, poultry and seafood
    1.9% [0.3–5.9%]9 studies
  • Fruit and vegetable processing
    1.4% [0.2–4.8%]7 studies
  • Grain and oilseed milling
    1.4% [0.2–4.6%]6 studies
  • Sugar and confectionery
    1.4% [0.2–4.4%]9 studies
  • Snacks, coffee, tea and other foods
    2.0% [0.3–6.5%]5 studies
  • Animal feed and pet food
    2.0% [0.3–6.6%]7 studies
  • Food manufacturing (unspecified or mixed)
    1.4% [0.2–4.8%]10 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Units produced during otherwise stable running fail to meet specification (weight, seal, shape, wrap or appearance) because of minor material misbehavior such as product sticking, folding or wrapping incorrectly around forming, cutting or packaging elements, and are removed from the line as scrap or rework.

How it looks in SCADA data

Engineering guidance

MES/quality modules show an elevated scrap or reject counter and a declining first-pass yield while the line state remains mostly in run, with short, scattered micro-stop events that do not reach the equipment-failure duration threshold and are not tied to a single sustained fault code.

Countermeasure

Engineering guidance

Tighten in-process monitoring and quick-clear procedures at the forming, cutting or wrapping station, adjust guides, tooling and material tension to prevent sticking or misforming, and reinforce operator checks and minor-stop logging so root causes of scrap are tracked and corrected.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 2.00 min · as reported: “Cute Wrap Up”
    Show verbatim quote
    Cute Wrap Up 1 1 2
  2. Defect rate: 0.340 % · as reported: “reject cooking”
    Show verbatim quote
    Chicken sausages have several types of defects like wrinkled (0,9%), fungus (0,04%), and reject cooking (0,34%).
  3. Defect rate: 15.0 % · as reported: “Scrap rate”
    Show verbatim quote
    PokaYoke Scrap rate 15% 5% 4.00% -73.33%
  4. Share of lost time: 55.0 % · as reported: “high rate of decline”
    Show verbatim quote
    At the first level, three main reasons were identified: a high rate of decline (55%), a high rate of defective products (25%), and elevated unproductive times (20%).
  5. Defect rate: 4.00 % · as reported: “Scrap rate”
    Show verbatim quote
    PokaYoke Scrap rate 15% 5% 4.00% -73.33%
  6. Defect rate: 3.13 % · as reported: “discards”
    Show verbatim quote
    Discards rate % 3.13% 2% 0.96% -69.33%
  7. Defect rate: 0.960 % · as reported: “discards”
    Show verbatim quote
    Discards rate % 3.13% 2% 0.96% -69.33%
  8. Defect rate: 10.0 % · as reported: “reject produk”
    Show verbatim quote
    Tingkat reject produk mencapai 10%, yang cukup signifikan untuk diperbaiki.
  9. Share of lost time: 54.7 % · as reported: “Target achieve”
    Show verbatim quote
    1 Target achieve 734.34 54.72 54.72 Vital few
  10. Lost time: 734 hrs · as reported: “Target achieve”
    Show verbatim quote
    1 Target achieve 734.34 54.72 54.72 Vital few