foratvise
Get Started
Included study

Enhancing Operational Efficiency in Craft Beer Production: Implementation of Lean Manufacturing and TPM Methodologies in SMEs

Open source

1Bibliographic record

Authors
Ronald Wilmer Perez-Peralta, Adonis Meza-Estrada, Martin Fidel Collao-Diaz
Year
2024
Venue
International Conference on Industrial Engineering and Operations Management (IEOM)
Country
Peru
Segment
Brewing, wine and spirits
Process family
Filling and packaging line
Study type
Before/after intervention
Extraction scope
Full text
Size
1 plants · 1 lines · 1 machines
Observation period
—
Data collection
not_reported
Intervention
Show the setting as described by the study
The set-up and format change time in the packaging machine to produce beer cans should be reduced with the help of distance optimization in relation to the components for changing the format and configuration of the equipment.

2Risk of bias

Scored with the rubric of the protocol: 2 low concern, 1 some concerns, 0 high concern.
Total score 8Moderate risk
ItemScore
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period not reported.0 / 2
How were loss data collected?Interviews, estimates, or method not reported.0 / 2
Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown.1 / 2
Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed.1 / 2
Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method.1 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Extracted data

Each datum with its classification and the verbatim quote that states it.
Reported causeLoss categoryMetricValueExtraction
—
Show verbatim quote (Section 4.1 Initial Diagnosis)
The operational efficiency of the case study stood at 78.10% during 2022, in contrast to the industry standard of 85% (Danlyan et al., 2020).
noneOEE78.1 %Single extractor
errors in the conduct of operations
Show verbatim quote (Section 4.1 Initial Diagnosis)
errors in the conduct of operations accounted for 39.20%, reprocessing constituted 13.95%, and process shutdowns due to machine failures covered 46.85%.
Not classifiable from the reportShare of lost time39.2 %Single extractor
reprocessing
Show verbatim quote (Section 4.1 Initial Diagnosis)
errors in the conduct of operations accounted for 39.20%, reprocessing constituted 13.95%, and process shutdowns due to machine failures covered 46.85%.
Process defects (scrap and rework)Share of lost time14.0 %Single extractor
process shutdowns due to machine failures
Show verbatim quote (Section 4.1 Initial Diagnosis)
errors in the conduct of operations accounted for 39.20%, reprocessing constituted 13.95%, and process shutdowns due to machine failures covered 46.85%.
Equipment failure (breakdowns)Share of lost time46.9 %Single extractor
setup timepacker (filler)
Show verbatim quote (Table 1 / Section 5 Results)
Setup time was reduced from 41 to 29 minutes, representing a 29% decrease.
Setup and adjustmentsMean event duration41.0 minSingle extractor
downtime of the processpacker (filler)
Show verbatim quote (Table 1 / Section 5 Results)
Process downtime decreased from 74 to 22.75 minutes, a 69% reduction.
Not classifiable from the reportLost time74.0 minSingle extractor
rate of defective productspacker (filler)
Show verbatim quote (Table 1 / Section 5 Results)
The rate of defective products was reduced from 2.97% to 1.30%, which is equivalent to a 56% decrease.
Process defects (scrap and rework)Defect rate2.97 %Single extractor
setup timepacker (filler)
Show verbatim quote (Table 1 / Section 5 Results)
Setup time was reduced from 41 to 29 minutes, representing a 29% decrease.
Setup and adjustmentsMean event duration29.0 minSingle extractor
downtime of the processpacker (filler)
Show verbatim quote (Table 1 / Section 5 Results)
Process downtime decreased from 74 to 22.75 minutes, a 69% reduction.
Not classifiable from the reportLost time22.8 minSingle extractor
rate of defective productspacker (filler)
Show verbatim quote (Table 1 / Section 5 Results)
The rate of defective products was reduced from 2.97% to 1.30%, which is equivalent to a 56% decrease.
Process defects (scrap and rework)Defect rate1.30 %Single extractor
—Filler/packer
Show verbatim quote (Table 1, Section 5. Results)
SETUP Time (min) | 41 | 30 | 29 | -29%
Setup and adjustmentsLost time41.0 minSingle extractor
—Filler/packer
Show verbatim quote (Table 1, Section 5. Results)
Downtime of the process (min) | 74 | 45 | 22.75 | -69%
Not classifiable from the reportLost time74.0 minSingle extractor
—
Show verbatim quote (Table 1, Section 5. Results)
Rate of defective products (%) | 2.97% | 1.50% | 1.30% | -56%
Process defects (scrap and rework)Defect rate2.97 %Single extractor
—Filler/packer
Show verbatim quote (Table 1, Section 5. Results)
SETUP Time (min) | 41 | 30 | 29 | -29%
Setup and adjustmentsLost time29.0 minSingle extractor
—Filler/packer
Show verbatim quote (Table 1, Section 5. Results)
Downtime of the process (min) | 74 | 45 | 22.75 | -69%
Not classifiable from the reportLost time22.8 minSingle extractor
—
Show verbatim quote (Table 1, Section 5. Results)
Rate of defective products (%) | 2.97% | 1.50% | 1.30% | -56%
Process defects (scrap and rework)Defect rate1.30 %Single extractor

Observation units

  • Whole plant (2022 diagnosis) · Whole line or unspecified equipment · Baseline
  • Packaging line (filler) · Filling · Baseline
  • Packaging line (filler) · Filling · After intervention
  • Filler · Filling · Baseline
  • Filler · Filling · After intervention