foratvise
Get Started
Included study

Analisis Overall Equipment Effectiveness dan Six Big Losses pada Mesin Packaging Makanan di PT XYZ

Open source

1Bibliographic record

Authors
Arsyad Sumantika, HENDY RINALDY, Bahariandi Aji Prasetyo, Elsya Paskaria Loyda Tarigan, Sri Zetli
Year
2026
Venue
Jurnal Surya Teknika
Country
Indonesia
Segment
Food manufacturing (unspecified or mixed)
Process family
Filling and packaging line
Study type
Single case study
Extraction scope
Full text
Size
1 plants · 1 lines · 1 machines
Observation period
365 days
Data collection
manual_logs
Intervention
Show the setting as described by the study
Mesin yang diteliti merupakan mesin automatic vertical packaging yang digunakan untuk proses pengemasan produk makanan.

2Risk of bias

Scored with the rubric of the protocol: 2 low concern, 1 some concerns, 0 high concern.
Total score 13Low risk
ItemScore
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described.1 / 2
Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events).2 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?Formulae or definitions are given for the reported metrics, including what counts as planned time.2 / 2
Does the loss breakdown account for the total loss it claims to explain?The reported causes or categories sum to at least 90% of the stated total, or an explicit "other" class closes the balance.2 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points.2 / 2
Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration.1 / 2

3Extracted data

Each datum with its classification and the verbatim quote that states it.
Reported causeLoss categoryMetricValueExtraction
—mesin packaging
Show verbatim quote (Section 3.1.2 / Tabel 4)
Berdasarkan hasil perhitungan diperoleh rata-rata performance efficiency sebesar 87,49%.
nonePerformance87.5 %Both extractors agreed
—mesin packaging
Show verbatim quote (Section 3.1.1 / Tabel 3)
Hasil perhitungan menunjukkan bahwa tingkat ketersediaan mesin packaging selama tahun 2025 rata-rata sebesar 97,00%
noneAvailability97.0 %Both extractors agreed
—mesin packaging
Show verbatim quote (Tabel 5)
Rata-rata 493.583 8.454 485.129 98,29
noneQuality98.3 %Both extractors agreed
—mesin packaging
Show verbatim quote (Section 3.1.4)
OEE = Availability × Performance × Quality = 97.00% × 87.49% × 98.29% = 83.42%
noneOEE83.4 %Both extractors agreed
Setup and Adjustment Losses
Show verbatim quote (Tabel 7)
Kegagalan karena Setup and Adjustment Losses 31,20 11,82 Sedang
Setup and adjustmentsShare of lost time11.8 %Both extractors agreed
Setup and Adjustment Losses
Show verbatim quote (Tabel 7)
Kegagalan karena Setup and Adjustment Losses 31,20 11,82 Sedang
Setup and adjustmentsLost time31.2 JamBoth extractors agreed
Idling and Minor Stoppages
Show verbatim quote (Tabel 7)
Kegagalan karena Idling and Minor Stoppages 49,21 18,64 Tinggi
Idling and minor stops (micro-stops)Lost time49.2 JamBoth extractors agreed
Process Defect Losses
Show verbatim quote (Tabel 7)
Kegagalan karena Process Defect Losses 25,28 9,58 Sedang
Process defects (scrap and rework)Share of lost time9.58 %Both extractors agreed
Process Defect Losses
Show verbatim quote (Tabel 7)
Kegagalan karena Process Defect Losses 25,28 9,58 Sedang
Process defects (scrap and rework)Lost time25.3 JamBoth extractors agreed
Reduced Speed Losses
Show verbatim quote (Tabel 7)
Kegagalan karena Reduced Speed Losses 65,28 24,73 Tinggi
Reduced speedLost time65.3 JamBoth extractors agreed
Reduced Yield Losses
Show verbatim quote (Tabel 7)
Kegagalan karena Reduced Yield Losses 9,98 3,78 Rendah
Start-up losses (reduced yield)Share of lost time3.78 %Both extractors agreed
Reduced Yield Losses
Show verbatim quote (Tabel 7)
Kegagalan karena Reduced Yield Losses 9,98 3,78 Rendah
Start-up losses (reduced yield)Lost time9.98 JamBoth extractors agreed
Breakdown Losses
Show verbatim quote (Tabel 7)
Kegagalan karena Breakdown Losses 83,03 31,45 Sangat Tinggi
Equipment failure (breakdowns)Lost time83.0 JamBoth extractors agreed
Breakdown Losses
Show verbatim quote (Section 3.1.5 / Tabel 7)
diketahui bahwa faktor kegagalan berasal dari Breakdown Losses sebesar 31,45%, Reduced Speed Losses sebesar 24,73%, dan Idling and Minor Stoppages sebesar 18,64%.
Equipment failure (breakdowns)Share of lost time31.5 %Single extractor
Idling and Minor Stoppages
Show verbatim quote (Section 3.1.5 / Tabel 7)
diketahui bahwa faktor kegagalan berasal dari Breakdown Losses sebesar 31,45%, Reduced Speed Losses sebesar 24,73%, dan Idling and Minor Stoppages sebesar 18,64%.
Idling and minor stops (micro-stops)Share of lost time18.6 %Single extractor
Reduced Speed Losses
Show verbatim quote (Section 3.1.5 / Tabel 7)
diketahui bahwa faktor kegagalan berasal dari Breakdown Losses sebesar 31,45%, Reduced Speed Losses sebesar 24,73%, dan Idling and Minor Stoppages sebesar 18,64%.
Reduced speedShare of lost time24.7 %Single extractor
—mesin packaging
Show verbatim quote (Section 3.1)
Rata-rata output produksi aktual perusahaan hanya mencapai 493.583 pcs per bulan atau sekitar 91,40% dari target produksi perusahaan.
noneThroughput493,583 pcs/bulanSingle extractor
—
Show verbatim quote (Page 7, Table 7)
Kegagalan karena Breakdown Losses | 83,03 | 31,45 | Sangat Tinggi
Equipment failure (breakdowns)Share of lost time31.5 %Single extractor
—
Show verbatim quote (Page 7, Table 7)
Kegagalan karena Idling and Minor Stoppages | 49,21 | 18,64 | Tinggi
Idling and minor stops (micro-stops)Share of lost time18.6 %Single extractor
—
Show verbatim quote (Page 7, Table 7)
Kegagalan karena Reduced Speed Losses | 65,28 | 24,73 | Tinggi
Reduced speedShare of lost time24.7 %Single extractor

Observation units

  • Mesin Packaging PT XYZ · Packaging (forming, sealing, wrapping, case packing, palletizing) · Baseline
  • Packaging Machine · Packaging (forming, sealing, wrapping, case packing, palletizing) · Baseline