foratvise
Get Started
Equipment failure (breakdowns)

Packaging machine breakdown

In short

It appears in about 4 of every 100 lines studied.

When it appears, it takes on average about 58 % of the line's lost time. Reported by 15 of the 112 studies that could observe it (strong evidence).

What happens

A mechanical, electrical, pneumatic or control component of the packer, case packer or wrapping/casing equipment degrades or fails outright (worn parts, broken drive elements, sensor or actuator faults), interrupting the packaging function until a technician repairs or replaces it. Because the fault requires maintenance intervention rather than a simple operator reset, the stop is classified as a breakdown rather than a minor stop.

What is done about it

Implement condition-based and preventive maintenance on drives, bearings, seals and sensors of the packaging line, with vibration or wear monitoring to anticipate failure. Maintain critical spare parts on site, standardize fast fault-diagnosis and repair procedures, and perform root-cause analysis on recurring breakdowns to redesign weak components.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
4.4% [1.9–8.4%]
Expected share of lost time
2.6% [1.1–4.8%]
Share of lost time when present
58% [49–66%]
Studies / units
112 / 155
Evidence grade
A

Grade A: 10 or more studies and 10 or more distinct lines, with a 95% credible interval narrower than 0.20.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    3.8% [0.8–9.9%]14 studies
  • Soft drinks, bottled water and juices
    4.0% [1.2–8.3%]33 studies
  • Brewing, wine and spirits
    7.7% [2.3–17.2%]14 studies
  • Bakery and pasta
    6.2% [1.4–16.9%]6 studies
  • Meat, poultry and seafood
    6.1% [1.3–16.1%]6 studies
  • Fruit and vegetable processing
    4.6% [0.9–12.9%]4 studies
  • Grain and oilseed milling
    6.4% [1.3–17.9%]4 studies
  • Sugar and confectionery
    4.6% [0.9–13.1%]4 studies
  • Snacks, coffee, tea and other foods
    5.3% [1.3–13.3%]8 studies
  • Animal feed and pet food
    4.5% [0.8–12.1%]5 studies
  • Food manufacturing (unspecified or mixed)
    8.1% [2.4–18.1%]14 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

A mechanical, electrical, pneumatic or control component of the packer, case packer or wrapping/casing equipment degrades or fails outright (worn parts, broken drive elements, sensor or actuator faults), interrupting the packaging function until a technician repairs or replaces it. Because the fault requires maintenance intervention rather than a simple operator reset, the stop is classified as a breakdown rather than a minor stop.

How it looks in SCADA data

Engineering guidance

Machine state transitions from running to fault/down with the stop duration typically exceeding the minor-stop threshold, accompanied by a specific fault or alarm code from the packer's PLC (drive overload, sensor fault, safety interlock). The downtime counter for the packaging asset accumulates against an equipment-failure reason code, while upstream accumulation conveyors fill and downstream conveyors starve, visible as blocked/starved states on neighboring machines.

Countermeasure

Engineering guidance

Implement condition-based and preventive maintenance on drives, bearings, seals and sensors of the packaging line, with vibration or wear monitoring to anticipate failure. Maintain critical spare parts on site, standardize fast fault-diagnosis and repair procedures, and perform root-cause analysis on recurring breakdowns to redesign weak components.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 155 h · as reported: “breakdown”
    Show verbatim quote
    Total number hours of breakdown per year(hours) 154.5 117.66 158.3 264.5 128.6
  2. Lost time: 118 h · as reported: “breakdown”
    Show verbatim quote
    Total number hours of breakdown per year(hours) 154.5 117.66 158.3 264.5 128.6
  3. Lost time: 158 h · as reported: “breakdown”
    Show verbatim quote
    Total number hours of breakdown per year(hours) 154.5 117.66 158.3 264.5 128.6
  4. Lost time: 265 h · as reported: “breakdown”
    Show verbatim quote
    Total number hours of breakdown per year(hours) 154.5 117.66 158.3 264.5 128.6
  5. Lost time: 129 h · as reported: “breakdown”
    Show verbatim quote
    Total number hours of breakdown per year(hours) 154.5 117.66 158.3 264.5 128.6
  6. Lost time: 322 h · as reported: “breakdown”
    Show verbatim quote
    Total number hours of breakdown per year(hours) 321.5 165.8 285.5 364.3 216
  7. Lost time: 166 h · as reported: “breakdown”
    Show verbatim quote
    Total number hours of breakdown per year(hours) 321.5 165.8 285.5 364.3 216
  8. Lost time: 286 h · as reported: “breakdown”
    Show verbatim quote
    Total number hours of breakdown per year(hours) 321.5 165.8 285.5 364.3 216
  9. Lost time: 364 h · as reported: “breakdown”
    Show verbatim quote
    Total number hours of breakdown per year(hours) 321.5 165.8 285.5 364.3 216
  10. Lost time: 216 h · as reported: “breakdown”
    Show verbatim quote
    Total number hours of breakdown per year(hours) 321.5 165.8 285.5 364.3 216
  11. Lost time: 216 h · as reported: “breakdown”
    Show verbatim quote
    Total number hours of breakdown per year(hours) 321.5 165.8 285.5 364.3 216
  12. Lost time: 322 h · as reported: “breakdown”
    Show verbatim quote
    Total number hours of breakdown per year(hours) 321.5 165.8 285.5 364.3 216
  13. Lost time: 158 h · as reported: “breakdown”
    Show verbatim quote
    Total number hours of breakdown per year(hours) 154.5 117.66 158.3 264.5 128.6
  14. Lost time: 155 h · as reported: “breakdown”
    Show verbatim quote
    Total number hours of breakdown per year(hours) 154.5 117.66 158.3 264.5 128.6
  15. Lost time: 364 h · as reported: “breakdown”
    Show verbatim quote
    Total number hours of breakdown per year(hours) 321.5 165.8 285.5 364.3 216
  16. Lost time: 129 h · as reported: “breakdown”
    Show verbatim quote
    Total number hours of breakdown per year(hours) 154.5 117.66 158.3 264.5 128.6
  17. Lost time: 286 h · as reported: “breakdown”
    Show verbatim quote
    Total number hours of breakdown per year(hours) 321.5 165.8 285.5 364.3 216
  18. Lost time: 166 h · as reported: “breakdown”
    Show verbatim quote
    Total number hours of breakdown per year(hours) 321.5 165.8 285.5 364.3 216
  19. Lost time: 265 h · as reported: “breakdown”
    Show verbatim quote
    Total number hours of breakdown per year(hours) 154.5 117.66 158.3 264.5 128.6
  20. Lost time: 118 h · as reported: “breakdown”
    Show verbatim quote
    Total number hours of breakdown per year(hours) 154.5 117.66 158.3 264.5 128.6
  21. Lost time: 2,255 min · as reported: “Breakdown”
    Show verbatim quote
    Breakdown 2,255 56%
  22. Lost time: 1,498 min · as reported: “Setup after breakdown”
    Show verbatim quote
    Setting setelah breakdown 1,498 100%
  23. Lost time: 6,105 menit · as reported: “Breakdown”
    Show verbatim quote
    Total 6105 129243 61,33
  24. Share of planned time: 5.72 % · as reported: “Breakdown”
    Show verbatim quote
    Rata-rata 469,62 941,77 5,72
  25. Share of lost time: 6.00 % · as reported: “automation failures”
    Show verbatim quote
    A deeper analysis of non-scheduled maintenance data (Figure 9) shows that major causes of packing equipment failure are related to: electrical failures (26%), unscheduled operational (26%) or mechanical (23%) adjustments, worn parts or equipment breakdown (13%) and automation failures (6%).
  26. Share of lost time: 13.0 % · as reported: “worn parts or equipment breakdown”
    Show verbatim quote
    A deeper analysis of non-scheduled maintenance data (Figure 9) shows that major causes of packing equipment failure are related to: electrical failures (26%), unscheduled operational (26%) or mechanical (23%) adjustments, worn parts or equipment breakdown (13%) and automation failures (6%).
  27. Share of lost time: 26.0 % · as reported: “electrical failures”
    Show verbatim quote
    A deeper analysis of non-scheduled maintenance data (Figure 9) shows that major causes of packing equipment failure are related to: electrical failures (26%), unscheduled operational (26%) or mechanical (23%) adjustments, worn parts or equipment breakdown (13%) and automation failures (6%).
  28. Share of lost time: 22.0 % · as reported: “packaging failure”
    Show verbatim quote
    Major Availability losses were categorized as: non-scheduled maintenance (29,010 min. - 58% of Availability losses); packaging failure (11,079 min. - 22%); lack of demand that are downstream losses (8,260 min. - 13%) and; lack of product input to the packing line (952 min. – 2%).
  29. Lost time: 11,079 min · as reported: “packaging failure”
    Show verbatim quote
    Major Availability losses were categorized as: non-scheduled maintenance (29,010 min. - 58% of Availability losses); packaging failure (11,079 min. - 22%); lack of demand that are downstream losses (8,260 min. - 13%) and; lack of product input to the packing line (952 min. – 2%).
  30. Lost time: 220 min · as reported: “PM2”
    Show verbatim quote
    Total 2540 485 500 560 450 265 225 240 220 5485 224940 2.44%
  31. Lost time: 225 min · as reported: “PM1”
    Show verbatim quote
    Total 2540 485 500 560 450 265 225 240 220 5485 224940 2.44%
  32. Number of events: 11.0 events · as reported: “PM1”
    Show verbatim quote
    Total 61 21 24 22 17 7 11 10 8 181
  33. Number of events: 8.00 events · as reported: “PM2”
    Show verbatim quote
    Total 61 21 24 22 17 7 11 10 8 181
  34. Share of lost time: 0.450 % · as reported: “Breakdown”
    Show verbatim quote
    Breakdown 0.45% 0.94% 0.38%
  35. Share of lost time: 0.380 % · as reported: “Breakdown”
    Show verbatim quote
    Breakdown 0.45% 0.94% 0.38%
  36. Share of planned time: 1.27 % · as reported: “Breakdown”
    Show verbatim quote
    4 Breakdown 1,27 4,04 98,66
  37. Share of lost time: 4.04 % · as reported: “Breakdown”
    Show verbatim quote
    4 Breakdown 1,27 4,04 98,66
  38. Lost time: 13,590 min · as reported: “fallas”
    Show verbatim quote
    el tiempo total disponible fue de 71 588 minutos, con un tiempo de parada acumulado de 13 590 minutos y un total de 249 fallas.
  39. Number of events: 249 events · as reported: “fallas”
    Show verbatim quote
    el tiempo total disponible fue de 71 588 minutos, con un tiempo de parada acumulado de 13 590 minutos y un total de 249 fallas.
  40. Time between events: 233 min · as reported: “fallas”
    Show verbatim quote
    El MTBF promedio durante este período fue de 232.92 minutos, mientras que el MTTR fue de 54.58 minutos.
  41. Mean event duration: 54.6 min · as reported: “fallas”
    Show verbatim quote
    El MTBF promedio durante este período fue de 232.92 minutos, mientras que el MTTR fue de 54.58 minutos.
  42. Lost time: 5,671 min · as reported: “fallas”
    Show verbatim quote
    mostrando que el tiempo disponible fue de 47 290 minutos con un tiempo de parada de 5671 minutos y 110 fallas
  43. Number of events: 110 events · as reported: “fallas”
    Show verbatim quote
    mostrando que el tiempo disponible fue de 47 290 minutos con un tiempo de parada de 5671 minutos y 110 fallas
  44. Time between events: 378 min · as reported: “fallas”
    Show verbatim quote
    obteniendo un MTBF promedio de 378.36 minutos (Visualizar Fig. 7), un MTTR promedio de 51.55 minutos
  45. Mean event duration: 51.6 min · as reported: “fallas”
    Show verbatim quote
    obteniendo un MTBF promedio de 378.36 minutos (Visualizar Fig. 7), un MTTR promedio de 51.55 minutos
  46. Share of lost time: 27.0 % · as reported: “technical machinery failures”
    Show verbatim quote
    technical machinery failures, which accounted for 27.01% and could be mitigated through autonomous maintenance based on 5S principles within a TPM framework.
  47. Share of lost time: 50.0 % · as reported: “Equipment Failure Losses”
    Show verbatim quote
    Equipment Failure Losses 20.205 20.205 50% 50%
  48. Lost time: 20,205 Minutes · as reported: “Equipment Failure Losses”
    Show verbatim quote
    Equipment Failure Losses 20.205 20.205 50% 50%
  49. Time between events: 22.6 h · as reported: “mechanical failure (corrective intervention)”
    Show verbatim quote
    The baseline Mean Time Between Failures (MTBF) was 22.61 hours with a standard deviation of 10.91 hours; average corrective intervention time was 11.69 hours (see Table 4).
  50. Mean event duration: 11.7 h · as reported: “mechanical failure (corrective intervention)”
    Show verbatim quote
    The baseline Mean Time Between Failures (MTBF) was 22.61 hours with a standard deviation of 10.91 hours; average corrective intervention time was 11.69 hours (see Table 4).
  51. Time between events: 32.0 h · as reported: “mechanical failure”
    Show verbatim quote
    on the 3rd of that month, 32 hours of operation were recorded until intervention, while on the 29th of the same month, only 6.25 hours were reached before maintenance was required.
  52. Time between events: 6.25 h · as reported: “mechanical failure”
    Show verbatim quote
    on the 3rd of that month, 32 hours of operation were recorded until intervention, while on the 29th of the same month, only 6.25 hours were reached before maintenance was required.
  53. Lost time: 83.0 Jam · as reported: “Breakdown Losses”
    Show verbatim quote
    Kegagalan karena Breakdown Losses 83,03 31,45 Sangat Tinggi
  54. Share of lost time: 31.5 % · as reported: “Breakdown Losses”
    Show verbatim quote
    diketahui bahwa faktor kegagalan berasal dari Breakdown Losses sebesar 31,45%, Reduced Speed Losses sebesar 24,73%, dan Idling and Minor Stoppages sebesar 18,64%.
  55. Time between events: 117 h · as reported: “mechanical failure”
    Show verbatim quote
    Furthermore, the mechanical MTBF increased from 98.74 h to 117.25 h, while the electrical MTBF increased from 144.31 h to 170.55 h.
  56. Mean event duration: 7.50 h · as reported: “mechanical failure”
    Show verbatim quote
    the mechanical MTTR decreased from 9.73 h to 7.50 h
  57. Time between events: 98.7 h · as reported: “mechanical failure”
    Show verbatim quote
    Furthermore, the mechanical MTBF increased from 98.74 h to 117.25 h, while the electrical MTBF increased from 144.31 h to 170.55 h.
  58. Mean event duration: 9.73 h · as reported: “mechanical failure”
    Show verbatim quote
    the mechanical MTTR decreased from 9.73 h to 7.50 h
  59. Share of lost time: 25.0 % · as reported: “Breakdown loss”
    Show verbatim quote
    Breakdown loss 25