foratvise
Get Started
Equipment failure (breakdowns)

Conveyor mechanical fault or jam

Equipment failure (breakdowns)AvailabilityConveying and accumulation

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 59 % of the line's lost time. Reported by 2 of the 86 studies that could observe it (limited evidence).

What happens

Conveyors (belt, chain, roller, vibratory or guide types) stop unexpectedly due to mechanical wear, misalignment, broken belts or chains, jammed or fallen product, blocked guide rails, or drive and sensor malfunctions. These faults occur across many different conveyor sections of the line (infeed, combiner, depalletizer, inspection, case handling) and require operator or maintenance intervention to clear.

What is done about it

Apply preventive maintenance to belts, chains, rollers, guides and drive motors, including lubrication, tensioning and alignment checks; calibrate and shield jam-detection sensors; install guarding or guide adjustments to prevent product fall-off and jamming; standardize quick jam-clearing procedures for operators.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.9% [0.2–2.3%]
Expected share of lost time
0.5% [0.1–1.4%]
Share of lost time when present
59% [49–68%]
Studies / units
86 / 112
Evidence grade
C

Grade C: 2 to 4 studies, or an interval wider than 0.35.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    1.0% [0.1–3.5%]11 studies
  • Soft drinks, bottled water and juices
    1.5% [0.3–4.4%]28 studies
  • Brewing, wine and spirits
    1.0% [0.1–3.2%]12 studies
  • Bakery and pasta
    1.1% [0.1–4.1%]0 studies
  • Meat, poultry and seafood
    1.0% [0.1–3.8%]5 studies
  • Fruit and vegetable processing
    1.0% [0.1–3.6%]4 studies
  • Grain and oilseed milling
    1.0% [0.1–3.6%]4 studies
  • Sugar and confectionery
    1.1% [0.1–3.9%]4 studies
  • Snacks, coffee, tea and other foods
    1.0% [0.1–3.6%]4 studies
  • Animal feed and pet food
    1.1% [0.1–3.9%]5 studies
  • Food manufacturing (unspecified or mixed)
    1.0% [0.1–3.6%]9 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Conveyors (belt, chain, roller, vibratory or guide types) stop unexpectedly due to mechanical wear, misalignment, broken belts or chains, jammed or fallen product, blocked guide rails, or drive and sensor malfunctions. These faults occur across many different conveyor sections of the line (infeed, combiner, depalletizer, inspection, case handling) and require operator or maintenance intervention to clear.

How it looks in SCADA data

Engineering guidance

Downtime events logged against the specific conveyor equipment tag, with fault or jam alarm codes from photoeyes, encoders or drive overload protection; neighbouring upstream equipment shows blocking and downstream equipment shows starvation during the stop; repeated short-duration stop clusters at the same conveyor location indicate recurring mechanical issues.

Countermeasure

Engineering guidance

Apply preventive maintenance to belts, chains, rollers, guides and drive motors, including lubrication, tensioning and alignment checks; calibrate and shield jam-detection sensors; install guarding or guide adjustments to prevent product fall-off and jamming; standardize quick jam-clearing procedures for operators.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 28.0 min · as reported: “Conveyor Problem”
    Show verbatim quote
    Conveyor Problem 16 12 28
  2. Lost time: 30.0 min · as reported: “conveyor after checkmat”
    Show verbatim quote
    conveyor after checkmat 2 30 334 6272 100 100
  3. Number of events: 2.00 events · as reported: “conveyor after checkmat”
    Show verbatim quote
    conveyor after checkmat 2 30 334 6272 100 100
  4. Lost time: 810 min · as reported: “conveyor vibrator pre inspection”
    Show verbatim quote
    conveyor vibrator pre inspection 73 810 211 3427 63.17 54.64
  5. Number of events: 73.0 events · as reported: “conveyor vibrator pre inspection”
    Show verbatim quote
    conveyor vibrator pre inspection 73 810 211 3427 63.17 54.64
  6. Lost time: 115 min · as reported: “speed conveyor combiner”
    Show verbatim quote
    speed conveyor combiner 10 115 305 5502 91.32 87.72
  7. Number of events: 10.0 events · as reported: “speed conveyor combiner”
    Show verbatim quote
    speed conveyor combiner 10 115 305 5502 91.32 87.72
  8. Lost time: 2,617 min · as reported: “conveyor vibrator”
    Show verbatim quote
    conveyor vibrator 138 2617 138 2617 41.32 41.73
  9. Number of events: 138 events · as reported: “conveyor vibrator”
    Show verbatim quote
    conveyor vibrator 138 2617 138 2617 41.32 41.73
  10. Lost time: 225 min · as reported: “conveyor glideliner”
    Show verbatim quote
    conveyor glideliner 9 225 314 5727 94.01 91.31
  11. Number of events: 9.00 events · as reported: “conveyor glideliner”
    Show verbatim quote
    conveyor glideliner 9 225 314 5727 94.01 91.31
  12. Lost time: 220 min · as reported: “conveyor depall”
    Show verbatim quote
    conveyor depall 7 220 321 5947 96.11 94.82
  13. Number of events: 7.00 events · as reported: “conveyor depall”
    Show verbatim quote
    conveyor depall 7 220 321 5947 96.11 94.82
  14. Lost time: 1,300 min · as reported: “case conveyor”
    Show verbatim quote
    case conveyor 50 1300 261 4727 78.14 75.37
  15. Number of events: 50.0 events · as reported: “case conveyor”
    Show verbatim quote
    case conveyor 50 1300 261 4727 78.14 75.37
  16. Lost time: 215 min · as reported: “guide conveyor”
    Show verbatim quote
    guide conveyor 6 215 327 6162 97.90 98.25
  17. Number of events: 6.00 events · as reported: “guide conveyor”
    Show verbatim quote
    guide conveyor 6 215 327 6162 97.90 98.25
  18. Lost time: 46.0 Minutes · as reported: “Conveyor”
    Show verbatim quote
    Conveyor 46 Defects, inventory
  19. Number of events: 3.00 events · as reported: “Conveyor Pouch”
    Show verbatim quote
    Conveyor Pouch 3
  20. Number of events: 44.0 events · as reported: “Intermediate conveyor”
    Show verbatim quote
    Esteira Intermediária 44 35,02 36,51 1332,87 22,50
  21. Mean event duration: 35.0 min · as reported: “Intermediate conveyor”
    Show verbatim quote
    Esteira Intermediária 44 35,02 36,51 1332,87 22,50
  22. Share of lost time: 55.0 % · as reported: “clogging of cookies in conveyor belt chutes”
    Show verbatim quote
    At the third level, the root causes were further detailed as clogging of cookies in conveyor belt chutes (55%), product fragility (13.5%), inadequate sealing of packaging (11.5%), and conveyor belt failures (20%).
  23. Share of lost time: 20.0 % · as reported: “conveyor belt failures”
    Show verbatim quote
    At the third level, the root causes were further detailed as clogging of cookies in conveyor belt chutes (55%), product fragility (13.5%), inadequate sealing of packaging (11.5%), and conveyor belt failures (20%).
  24. Lost time: 3.00 hrs · as reported: “Conveyor Jam”
    Show verbatim quote
    4 Eva Water 75cl 24 20,000 18,430 3.0 Conveyor Jam 86.2 Inconsistent water supply pressure