foratvise
Get Started
Included study

Technical Analysis and Solutions to Reduce Scrap Rate In Liquid Filler Machine: Case Study: In Moha Soft Drink Production Line

Open source

1Bibliographic record

Authors
Samuel Berhe Gebremedhin, Goytom Desta Gebreyesus, Misgna Arefaine Gebreabzgi
Year
2025
Venue
Research Square
Country
Ethiopia
Segment
Soft drinks, bottled water and juices
Process family
Filling and packaging line
Study type
Single case study
Extraction scope
Full text
Size
1 plants · 1 lines · 1 machines
Observation period
120 days
Data collection
manual_logs
Intervention
Show the setting as described by the study
This study focuses on the filler machine at the Moha Soft Drink Factory in Mekelle, where scrap accounts for approximately 3.85% of production, thereby reducing profitability.

2Risk of bias

Scored with the rubric of the protocol: 2 low concern, 1 some concerns, 0 high concern.
Total score 11Moderate risk
ItemScore
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events).2 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers.0 / 2
Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed.1 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Extracted data

Each datum with its classification and the verbatim quote that states it.
Reported causeLoss categoryMetricValueExtraction
—Filler machine
Show verbatim quote (Section 1 Introduction)
The company targets a production yield of 98.5%, yet actual operations show an average monthly scrap rate of about 3.85%.
Process defects (scrap and rework)Defect rate3.85 %Both extractors agreed
Out of space
Show verbatim quote (Section 4.1 / Table 2)
Full breakage and out-of-space defects were less common, contributing 4,518 and 1,296 cases, respectively, across the study period.
Process defects (scrap and rework)Number of events1,296 casesBoth extractors agreed
Full breakage
Show verbatim quote (Section 4.1 / Table 2)
Full breakage and out-of-space defects were less common, contributing 4,518 and 1,296 cases, respectively, across the study period.
Process defects (scrap and rework)Number of events4,518 casesBoth extractors agreed
Contaminated
Show verbatim quote (Section 4.1 / Table 2)
Among these, underfill defects were the most frequent, with a total of 20,598 cases, followed by uncrowned bottles with 14,508 cases, and contamination with 8,124 cases.
Process defects (scrap and rework)Number of events8,124 casesBoth extractors agreed
UncrownedCrowner (crowning system)
Show verbatim quote (Section 4.1 / Table 2)
Among these, underfill defects were the most frequent, with a total of 20,598 cases, followed by uncrowned bottles with 14,508 cases, and contamination with 8,124 cases.
Process defects (scrap and rework)Number of events14,508 casesBoth extractors agreed
Under fillFiller machine (filling valve, piston)
Show verbatim quote (Section 4.1 / Table 2)
Among these, underfill defects were the most frequent, with a total of 20,598 cases, followed by uncrowned bottles with 14,508 cases, and contamination with 8,124 cases.
Process defects (scrap and rework)Number of events20,598 casesBoth extractors agreed
Total scrap
Show verbatim quote (Table 2)
Total | 20598 | 14508 | 8124 | 4518 | 1296 | 49044
Not classifiable from the reportNumber of events49,044 casesSingle extractor
—
Show verbatim quote (Section 4.1)
Underfill, uncrowned, and contamination together accounted for 88.1% of all scrap, confirming that these are the most critical defects in the production line.
Not classifiable from the reportShare of loss events88.1 %Single extractor
underfill, uncrowned bottles, and contamination
Show verbatim quote (Abstract and Section 4.1)
Pareto analysis revealed underfilling, uncrowned bottles, and contamination as the top contributors to scrap, accounting for 88.1% of total rejects.
Process defects (scrap and rework)Share of loss events88.1 %Single extractor

Observation units

  • Filler machine - Moha Soft Drink Factory · Filling · Baseline
  • Liquid Filler Machine · Filling · Baseline