Causes of loss
Canonical causes of stoppage and inefficiency, classified into the six big losses, with their probability of presence and evidence grade.
| Cause | Loss category | Probability of presence | Expected share of lost time | Evidence grade | Studies / units |
|---|---|---|---|---|---|
| Sucrose Loss to Acid Hydrolysis in EvaporationEvaporation | Process defects (scrap and rework) | 2.5% [0.5–6.7%] | 1.2% [0.2–3.4%] | C | 29 / 34 |
| Unspecified process defectsWhole line or unspecified equipment | Process defects (scrap and rework) | 1.7% [0.6–3.7%] | 0.8% [0.3–1.7%] | B | 127 / 161 |
| Unspecified packaging defectPackaging (forming, sealing, wrapping, case packing, palletizing) | Process defects (scrap and rework) | 1.6% [0.5–3.7%] | 0.8% [0.2–1.8%] | B | 112 / 155 |
| Rework of off-specification productWhole line or unspecified equipment | Process defects (scrap and rework) | 1.5% [0.5–3.4%] | 0.7% [0.2–1.6%] | B | 127 / 161 |
| Filling process quality defectsFilling | Process defects (scrap and rework) | 1.3% [0.4–3.1%] | 0.7% [0.2–1.6%] | B | 120 / 162 |
| Flexible package seal/forming defectPackaging (forming, sealing, wrapping, case packing, palletizing) | Process defects (scrap and rework) | 1.3% [0.4–3.0%] | 0.6% [0.2–1.5%] | C | 112 / 155 |
| Product scrap and rejectionWhole line or unspecified equipment | Process defects (scrap and rework) | 1.3% [0.4–2.9%] | 0.6% [0.2–1.4%] | C | 127 / 161 |
| Glass container breakageWhole line or unspecified equipment | Process defects (scrap and rework) | 1.2% [0.3–2.8%] | 0.6% [0.2–1.3%] | C | 127 / 161 |
| Baking process defects (under-proofed, burnt, contaminated product)Baking | Process defects (scrap and rework) | 1.1% [0.2–3.0%] | 0.5% [0.1–1.4%] | C | 60 / 73 |
| Off-spec liquid product from pasteurized base tankPasteurization | Process defects (scrap and rework) | 1.0% [0.2–3.4%] | 0.5% [0.1–1.6%] | D | 26 / 29 |
| Blow Molding Container DefectsForming, moulding and depositing | Process defects (scrap and rework) | 1.0% [0.2–2.7%] | 0.5% [0.1–1.3%] | C | 76 / 96 |
| Coagulation and fermentation process defectFermentation | Process defects (scrap and rework) | 1.0% [0.2–3.2%] | 0.5% [0.1–1.6%] | D | 29 / 33 |
| Organ rupture/damage during mechanical eviscerationSeparation (centrifugation, filtration, membranes) | Process defects (scrap and rework) | 1.0% [0.2–3.2%] | 0.5% [0.1–1.6%] | D | 37 / 44 |
| Impurity/dirt carryover from first-press separationSeparation (centrifugation, filtration, membranes) | Process defects (scrap and rework) | 1.0% [0.2–3.0%] | 0.5% [0.1–1.4%] | D | 37 / 44 |
| Rework due to separation process deviationSeparation (centrifugation, filtration, membranes) | Process defects (scrap and rework) | 1.0% [0.2–3.0%] | 0.5% [0.1–1.4%] | D | 37 / 44 |
| Weight/yield loss during pulpingSeparation (centrifugation, filtration, membranes) | Process defects (scrap and rework) | 0.9% [0.1–2.8%] | 0.5% [0.1–1.4%] | D | 37 / 44 |
| Abdomen cut depth/position deviationCutting, slicing and deboning | Process defects (scrap and rework) | 0.9% [0.2–2.8%] | 0.5% [0.1–1.4%] | D | 39 / 48 |
| Cut piece dimension/weight out of customer specification limitsCutting, slicing and deboning | Process defects (scrap and rework) | 0.9% [0.2–2.9%] | 0.5% [0.1–1.4%] | D | 39 / 48 |
| Color deviation defectMixing and blending | Process defects (scrap and rework) | 0.9% [0.2–2.8%] | 0.4% [0.1–1.4%] | D | 31 / 40 |
| Improper container seal (cap/bag sealing defect)Capping and seaming | Process defects (scrap and rework) | 0.9% [0.2–2.5%] | 0.4% [0.1–1.2%] | C | 82 / 109 |
| Over-trimmingCutting, slicing and deboning | Process defects (scrap and rework) | 0.9% [0.2–2.7%] | 0.4% [0.1–1.4%] | D | 39 / 48 |
| Rice polishing process defect (grain breakage/over-polishing)Milling and grinding | Process defects (scrap and rework) | 0.9% [0.2–2.7%] | 0.4% [0.1–1.3%] | D | 43 / 48 |
| Ripple mill nut cracking defect (whole/broken nut)Milling and grinding | Process defects (scrap and rework) | 0.9% [0.1–2.7%] | 0.4% [0.1–1.3%] | D | 43 / 48 |
| Milling yield loss from drying-induced grain fissuringMilling and grinding | Process defects (scrap and rework) | 0.9% [0.2–2.7%] | 0.4% [0.1–1.3%] | D | 43 / 48 |
| Husker roll clearance/speed mismatchMilling and grinding | Process defects (scrap and rework) | 0.9% [0.2–2.6%] | 0.4% [0.1–1.3%] | D | 43 / 48 |
| Off-Spec Particle Size from Hammer MillingMilling and grinding | Process defects (scrap and rework) | 0.9% [0.2–2.5%] | 0.4% [0.1–1.2%] | D | 43 / 48 |
| Filler dosing/valve fault causing overfillingFilling | Process defects (scrap and rework) | 0.9% [0.2–2.1%] | 0.4% [0.1–1.0%] | C | 120 / 162 |
| Heat seal defect (detached, wrinkled or folded seal)Packaging (forming, sealing, wrapping, case packing, palletizing) | Process defects (scrap and rework) | 0.8% [0.2–2.1%] | 0.4% [0.1–1.0%] | C | 112 / 155 |
| Unfilled pouch (empty pouch defect)Packaging (forming, sealing, wrapping, case packing, palletizing) | Process defects (scrap and rework) | 0.8% [0.2–2.0%] | 0.4% [0.1–1.0%] | C | 112 / 155 |
| Unwanted crystallization in cooked productCooking and frying | Process defects (scrap and rework) | 0.8% [0.1–2.3%] | 0.4% [0.1–1.1%] | D | 57 / 69 |
| Depanning Product DamageBaking | Process defects (scrap and rework) | 0.8% [0.1–2.2%] | 0.4% [0.1–1.1%] | D | 60 / 73 |
| Oven Temperature InstabilityBaking | Process defects (scrap and rework) | 0.8% [0.1–2.2%] | 0.4% [0.1–1.1%] | D | 60 / 73 |
| Fill content or contamination defectFilling | Process defects (scrap and rework) | 0.7% [0.2–2.0%] | 0.4% [0.1–1.0%] | C | 120 / 162 |
| Container cracking and contaminationWhole line or unspecified equipment | Process defects (scrap and rework) | 0.7% [0.2–1.8%] | 0.3% [0.1–0.9%] | C | 127 / 161 |
| Defective containers and closures (warped bottles, cap defects)Whole line or unspecified equipment | Process defects (scrap and rework) | 0.7% [0.2–1.8%] | 0.3% [0.1–0.9%] | C | 127 / 161 |
| Out-of-spec pellets requiring reprocessingForming, moulding and depositing | Process defects (scrap and rework) | 0.7% [0.1–2.1%] | 0.3% [0.1–1.0%] | D | 76 / 96 |
| Underfill / short fill volumeForming, moulding and depositing | Process defects (scrap and rework) | 0.7% [0.1–2.1%] | 0.3% [0.1–1.0%] | D | 76 / 96 |
| Missing or defective cap/seal on containerCapping and seaming | Process defects (scrap and rework) | 0.7% [0.1–1.9%] | 0.3% [0.1–0.9%] | D | 82 / 109 |
| Incorrect label applicationLabeling and coding | Process defects (scrap and rework) | 0.7% [0.1–1.9%] | 0.3% [0.1–0.9%] | D | 85 / 113 |
| Incorrect or Illegible Product CodingLabeling and coding | Process defects (scrap and rework) | 0.6% [0.1–1.7%] | 0.3% [0.1–0.9%] | D | 85 / 113 |
| Wrap/pack quality defect requiring reworkPackaging (forming, sealing, wrapping, case packing, palletizing) | Process defects (scrap and rework) | 0.6% [0.1–1.5%] | 0.3% [0.1–0.8%] | D | 112 / 155 |
| Aluminum foil tearingPackaging (forming, sealing, wrapping, case packing, palletizing) | Process defects (scrap and rework) | 0.6% [0.1–1.6%] | 0.3% [0.1–0.8%] | D | 112 / 155 |
| Package fill weight deviation (variation/overfilling)Packaging (forming, sealing, wrapping, case packing, palletizing) | Process defects (scrap and rework) | 0.6% [0.1–1.6%] | 0.3% [0.1–0.8%] | D | 112 / 155 |
| Packaging machine seal defects from component wearPackaging (forming, sealing, wrapping, case packing, palletizing) | Process defects (scrap and rework) | 0.6% [0.1–1.5%] | 0.3% [0.1–0.7%] | D | 112 / 155 |
| Selection/sorting error in separation processSeparation (centrifugation, filtration, membranes) | Process defects (scrap and rework) | 0.6% [0.1–1.8%] | 0.3% [0.0–0.9%] | D | 37 / 44 |
| Out-of-spec productPackaging (forming, sealing, wrapping, case packing, palletizing) | Process defects (scrap and rework) | 0.6% [0.1–1.5%] | 0.3% [0.1–0.8%] | D | 112 / 155 |
| Bag Fill Weight and Seal DefectsFilling | Process defects (scrap and rework) | 0.6% [0.1–1.6%] | 0.3% [0.1–0.8%] | D | 120 / 162 |
| Seed/foreign fragment contamination in pulpSeparation (centrifugation, filtration, membranes) | Process defects (scrap and rework) | 0.6% [0.1–1.9%] | 0.3% [0.0–0.9%] | D | 37 / 44 |
| Container Body or Seal DefectFilling | Process defects (scrap and rework) | 0.6% [0.1–1.5%] | 0.3% [0.1–0.7%] | D | 120 / 162 |
| Microbiological non-conformity of raw material during conditioningWhole line or unspecified equipment | Process defects (scrap and rework) | 0.6% [0.1–1.5%] | 0.3% [0.1–0.8%] | D | 127 / 161 |
| Ingredient mixing errorMixing and blending | Process defects (scrap and rework) | 0.5% [0.1–1.8%] | 0.3% [0.0–0.8%] | D | 31 / 40 |
| Inadequate Inventory Rotation (FIFO/FEFO Failure)Whole line or unspecified equipment | Process defects (scrap and rework) | 0.5% [0.1–1.5%] | 0.3% [0.1–0.7%] | D | 127 / 161 |
| Improper machine speed settingWhole line or unspecified equipment | Process defects (scrap and rework) | 0.5% [0.1–1.5%] | 0.3% [0.1–0.7%] | D | 127 / 161 |
| Excessive polishing machine pressureWhole line or unspecified equipment | Process defects (scrap and rework) | 0.5% [0.1–1.4%] | 0.3% [0.1–0.7%] | D | 127 / 161 |
| Fibrizer deflector wear causing off-spec fiber reworkMilling and grinding | Process defects (scrap and rework) | 0.5% [0.1–1.7%] | 0.3% [0.0–0.8%] | D | 43 / 48 |
| Delayed eviscerationWhole line or unspecified equipment | Process defects (scrap and rework) | 0.5% [0.1–1.4%] | 0.3% [0.0–0.7%] | D | 127 / 161 |
| Filling and closure defects (underfill, uncrowned, contamination)Filling | Process defects (scrap and rework) | 0.5% [0.1–1.5%] | 0.3% [0.1–0.7%] | D | 120 / 162 |
| Labeling and cap/seal defectsWhole line or unspecified equipment | Process defects (scrap and rework) | 0.5% [0.1–1.4%] | 0.3% [0.0–0.7%] | D | 127 / 161 |
| Fill level and label adhesion nonconformanceWhole line or unspecified equipment | Process defects (scrap and rework) | 0.5% [0.1–1.4%] | 0.2% [0.0–0.7%] | D | 127 / 161 |
| Toasting degree deviation (under/over-toasting)Cooking and frying | Process defects (scrap and rework) | 0.5% [0.1–1.6%] | 0.2% [0.0–0.8%] | D | 57 / 69 |
| Excessive ScaldingCooking and frying | Process defects (scrap and rework) | 0.5% [0.1–1.6%] | 0.2% [0.0–0.7%] | D | 57 / 69 |
| Process procedure deviationBaking | Process defects (scrap and rework) | 0.5% [0.1–1.5%] | 0.2% [0.0–0.7%] | D | 60 / 73 |
| Out-of-specification parts from press formingForming, moulding and depositing | Process defects (scrap and rework) | 0.4% [0.1–1.4%] | 0.2% [0.0–0.7%] | D | 76 / 96 |
| Dosing inaccuracy in forming/pelletizingForming, moulding and depositing | Process defects (scrap and rework) | 0.4% [0.1–1.4%] | 0.2% [0.0–0.6%] | D | 76 / 96 |
| Quality control rejection at inspection stageInspection and checkweighing | Process defects (scrap and rework) | 0.4% [0.1–1.3%] | 0.2% [0.0–0.6%] | D | 79 / 101 |
| Label too short / undersized labelLabeling and coding | Process defects (scrap and rework) | 0.4% [0.1–1.3%] | 0.2% [0.0–0.6%] | D | 85 / 113 |
| Missing product code/date stampLabeling and coding | Process defects (scrap and rework) | 0.4% [0.1–1.3%] | 0.2% [0.0–0.6%] | D | 85 / 113 |
| Missing or illegible expiry date printPackaging (forming, sealing, wrapping, case packing, palletizing) | Process defects (scrap and rework) | 0.4% [0.1–1.1%] | 0.2% [0.0–0.5%] | D | 112 / 155 |
| Excess air entrapped in sealed bagPackaging (forming, sealing, wrapping, case packing, palletizing) | Process defects (scrap and rework) | 0.4% [0.1–1.2%] | 0.2% [0.0–0.6%] | D | 112 / 155 |
| Defective packaging bagsPackaging (forming, sealing, wrapping, case packing, palletizing) | Process defects (scrap and rework) | 0.4% [0.1–1.2%] | 0.2% [0.0–0.6%] | D | 112 / 155 |
| Underfill (low fill weight/volume)Packaging (forming, sealing, wrapping, case packing, palletizing) | Process defects (scrap and rework) | 0.4% [0.1–1.1%] | 0.2% [0.0–0.5%] | D | 112 / 155 |
| Manual filling/weighing variationFilling | Process defects (scrap and rework) | 0.4% [0.1–1.1%] | 0.2% [0.0–0.5%] | D | 120 / 162 |
| Aseptic carton form-fill-seal defectPackaging (forming, sealing, wrapping, case packing, palletizing) | Process defects (scrap and rework) | 0.4% [0.1–1.1%] | 0.2% [0.0–0.5%] | D | 112 / 155 |
| Excessive Product Foaming During FillingFilling | Process defects (scrap and rework) | 0.4% [0.1–1.1%] | 0.2% [0.0–0.5%] | D | 120 / 162 |
| Manual rework due to packaging sealing defectsFilling | Process defects (scrap and rework) | 0.4% [0.1–1.1%] | 0.2% [0.0–0.5%] | D | 120 / 162 |
| Thermal variability during tempering affecting fill accuracyFilling | Process defects (scrap and rework) | 0.4% [0.1–1.1%] | 0.2% [0.0–0.5%] | D | 120 / 162 |
| Defective incoming pouch from supplierFilling | Process defects (scrap and rework) | 0.4% [0.1–1.1%] | 0.2% [0.0–0.5%] | D | 120 / 162 |
| Inadequate real-time detection of defective materialsWhole line or unspecified equipment | Process defects (scrap and rework) | 0.4% [0.1–1.1%] | 0.2% [0.0–0.5%] | D | 127 / 161 |
| Batch product out of composition specificationWhole line or unspecified equipment | Process defects (scrap and rework) | 0.4% [0.1–1.0%] | 0.2% [0.0–0.5%] | D | 127 / 161 |
| Doser calibration driftFilling | Process defects (scrap and rework) | 0.4% [0.1–1.0%] | 0.2% [0.0–0.5%] | D | 120 / 162 |

